CP-7[732-742]-series Mechanical Reference(2.9E).pdf - 第3页

Copyrights All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manual may not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise), or reused in an…

CP-7-series

Mechanical Reference

CP-732E

CP-742ME

CP-742E

MEC-CP7S-2.9E

Copyrights

All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manual

may not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise), or

reused in any way, without the prior written permission of Fuji Machine Manufacturing Co., Ltd.

Trademark Rights

is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the

following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,

Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the

U.S.A.

Windows NT is a trademark of Microsoft Corporation, USA.

UNLHA(32).DLL is a freeware product created by Micco.

Warranty and Liability

Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for situations that may arise due to

any of the following:

• The use of third party parts.

• The use of non-genuine Fuji parts.

• Incorrect settings made by the customer.

• Improper use of Fuji equipment.

Notice

Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for any situations that may arise as a

result of the use of this manual.

Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual without

notice.

Every effort has been made to ensure that this manual is correct in every detail. However, please

contact Fuji in the unlikely event that errors or omissions are detected.

About This Manual

This manual contains important machine system information for the user.

The manual content is intended for specialized technicians who are familiar with Surface

Mount Technology (SMT).

Please read this manual carefully in order to ensure safe and efficient machine operation.

This manual has been written specifically for the CP-732E, CP-742ME and CP-742E.

Unless otherwise stated, all explanations apply equally to all machines.

Manual Structure

This manual consists of the following eight parts.

Safety Guidelines

Part 1 The Machine

Part 2 Basic Operation

Part 3 Maintenance

Part 4 Adjustments

Part 5 Troubleshooting

Part 6 Setup

Supplementary Information

About This Manual

Edition 2.5 i CP-7 series Mechanical Reference