CP-7[732-742]-series Mechanical Reference(2.9E).pdf - 第88页

1.12 Cleaning the Oil Cooler Air Filter (Monthly) Point A filter is attached to the oil cooler unit. The air filter should be cleaned periodically to prevent damage to the machine as a result of blockage. Procedure W ARN…

1.11 Cleaning the Air Filter (Monthly)

Point

Filters are attached to each of the cooling fans on the machine. The air filters should be

cleaned periodically to ensure smooth passage of air and thus prevent overheating.

Procedure

WARNING

Be sure to turn the main power off before performing this

procedure.

Remove the cover and the filter and then use a vacuum cleaner to remove any particles

from the filter.

C7SM3022

Air filter

Filter cover

Part 3 Chapter 1 Cleaning

Edition 2.9 3-1-12 CP-7 series Mechanical Reference

1.12 Cleaning the Oil Cooler Air Filter (Monthly)

Point

A filter is attached to the oil cooler unit. The air filter should be cleaned periodically to

prevent damage to the machine as a result of blockage.

Procedure

WARNING

Be sure to turn the main power off before performing this

procedure.

1. Remove the acrylic cover from the top of the machine.

2. Hold the tab and lift the filter upwards to remove.

3. Clean the filter with a vacuum cleaner.

C7SM3025a

Filter

Tab

Acrylic cover Acrylic cover Acrylic cover

<CP-732E> <CP-742E><CP-742ME>

Part 3 Chapter 1 Cleaning

Edition 2.9 3-1-13 CP-7 series Mechanical Reference

1.13 Cleaning the Carrier Rodless Cylinder

(Monthly)

Point

There is a tendency for scattered parts and fine fibers etc. to adhere to the slide surface of

the rodless cylinder used to drive the carrier. As a result, it is necessary to perform

periodic cleaning.

Procedure

WARNING

Be sure to turn the main power off before performing this

procedure.

1. Lightly wipe the slide surface of the rodless cylinder using a fine cloth.

Furthermore, ensure to remove any dirt etc. that has accumulated between the

ends of the slider surface and the absorber holder.

2. Apply some grease to a fine cloth and wipe along the slider surface.

Note: Ensure to use Daphne Eponex No. 2 by Idemitsu.

Carrier cylinder

Absorber holder

Slider

Slide surface

Absorber holder

Part 3 Chapter 1 Cleaning

Edition 2.9 3-1-14 CP-7 series Mechanical Reference