CP-7[732-742]-series Mechanical Reference(2.9E).pdf - 第75页

Part 3 Maintenance

Notes:

Part 2 Chapter 6 Adjusting the Position of the Panel 2 Stopper

Edition 2.2 2-6-2 CP-7 series Mechanical Reference

Part 3

Maintenance

1. Cleaning

1.1 Emptying the Waste Tape Box and Cleaning

the Filter (Every 8 Hours)

Point

Waste tape which has been cut by the cutter is carried through a duct to the waste tape

box. This box should be emptied after every 8 hours of operation.

Procedure

Open the door, remove the waste tape box and empty the contents.

When emptying the waste tape box, also check the filter immediately above it. If the

filter is soiled, clean it with a vacuum cleaner.

Note: When cleaning is complete, ensure that the waste tape box and filter are inserted all the

way back to their original positions. Furthermore, ensure that the door is properly closed.

C7SM3006a

Waste tape box

Filter

<CP-732E>

<CP-742ME / 742E>

Part 3 Chapter 1 Cleaning

Edition 2.9 3-1-1 CP-7 series Mechanical Reference