CP-7[732-742]-series Mechanical Reference(2.9E).pdf - 第203页

Part 5 T roubleshooting

Notes:

Part 4 Chapter 1 Station Adjustments

Edition 2.4 4-1-52 CP-7 series Mechanical Reference

Part 5

Troubleshooting

1. Troubleshooting Table

This chapter describes troubleshooting measures for problems which may occur during

production.

Separate troubleshooting tables are provided for each type of problem. When a problem

occurs, begin by identifying the appropriate table for the problem in question, then refer

to the "Cause" column of that table to find the problem cause. After locating the cause,

refer to the "Remedy" and "Remarks" columns to the right of that item for details

regarding appropriate corrective actions. The "Ref. Page" column at the far right of the

table indicates reference material (manuals, etc.) chapter numbers where information is

given regarding the procedure in question.

The following alphabetic codes are used in the "Ref. Page" column to indicate the various

reference materials:

M: CP-7 series Mechanical Reference (MEC-CP733-✽.✽E)

S: CP-7 series System Reference (SYS-CP733-✽.✽E)

T: FujiCam Tutorial Manual (EKEN201✽)

U: F4G User's Manual (ELEN008✽)

FM: CP Feeders Mechanical Reference (MEC-CPFDR-✽.✽E)

FJ: CP Tape Feeder Jig Instruction Manual (INS-CPFJG-✽.✽E)

SG: Feeder Setup Guide (GDE-FEEDER-✽.✽E)

PG: WC Feeder Pickup Position Adjustment Guide (GDE-PKUPT-✽.✽E)

Part 5 Chapter 1 Troubleshooting Table

Edition 2.7 5-1-1 CP-7 series Mechanical Reference