00198150-02_SM_TX_en.pdf - 第25页

2 Basic Machine 2.2 Replacing the Gas Pressure Shock Absorber on the Cover Service Manual SIPLACE TX Series 06/2017 25 Fig.10: Ball at the gas pressure shock absorber ► If necessary: remove the ball (1) with an open- e…

100%1 / 316
2 Basic Machine
2.2 Replacing the Gas Pressure Shock Absorber on the Cover
24 Service Manual SIPLACE TX Series 06/2017
2.2 Replacing the Gas Pressure Shock Absorber on the
Cover
Parts, equipment and tools
●
For short cover: Gas pressure shock absorber, two-stage 580N [03126577‑xx]
●
For long cover: Gas pressure shock absorber, two-stage 710N [03126589‑xx]
●
Loctite 241 [02101037‑xx], if required (for loose screwed fixtures)
NOTICE
Second Person
► You might find it advisable to enlist the help of a second person.
Overview
Fig.8: Gas pressure shock absorber
1. Gas pressure shock absorber on the cover
(two per cover)
Removal
Fig.9: Removing the bottom of the gas pressure shock
absorber
► Open the cover and fix it in a position which gives
you best access for working and which ensures
that it cannot close itself on its own.
A spring(1) is securing the gas pressure shock
absorber on the ball(4).
► Remove the spring(1) on the bottom of the gas
pressure shock absorber. Use a screwdriver(2)
or similar to move the spring a little.
► Pull off the bottom(3) of the gas pressure shock
absorber.
 CAUTION!
Cover could fall down
As soon as one gas pressure shock absorber is
released, the cover could fall down if not suffi-
ciently fixed.
.
► Repeat for the top of the gas pressure shock
absorber.
2 Basic Machine
2.2 Replacing the Gas Pressure Shock Absorber on the Cover
Service Manual SIPLACE TX Series 06/2017 25
Fig.10: Ball at the gas pressure shock absorber
► If necessary: remove the ball(1) with an open-
ended wrench.
► If necessary: repeat for the ball on the top of the
gas pressure shock absorber.
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following in-
structions:
 CAUTION!
Installation instructions
Secure the threads of the balls with Loctite241.
Observe the correct installation direction for the
gas pressure shock absorber.
You may have to compress the gas pressure
shock absorber slightly when installing it.
.
2 Basic Machine
2.3 Replacing the Swivel Head [03006436-xx]
26 Service Manual SIPLACE TX Series 06/2017
2.3 Replacing the Swivel Head [03006436-xx]
Parts, equipment and tools
●
Swivel head BEM 08-20-501 M8 [03006436-xx]
●
Loctite 241 [02101037‑xx]
NOTICE
Second Person
► You might find it advisable to enlist the help of a second person.
Overview
Fig.11: Swivel head
1. Swivel head
Removal
Fig.12: Removing the bottom of the gas pressure shock ab-
sorber
► Open the cover and fix it in a position which gives
you best access for working and which ensures
that it cannot close itself on its own.
A spring(1) is securing the gas pressure shock ab-
sorber on the ball(4).
► Remove the spring(1) on the bottom of the gas
pressure shock absorber. Use a screwdriver(2)
or similar to move the spring a little.
► Pull off the bottom(3) of the gas pressure shock
absorber.
 CAUTION!
Cover could fall down
As soon as one gas pressure shock absorber is
released, the cover could fall down if not suffi-
ciently fixed.
.
► Repeat for the gas pressure shock absorber on
the other side of the cover.