00198150-02_SM_TX_en.pdf - 第309页
14 JEDEC Tray Feeder 14.1 SIPLACE JTF-ML Service Manual SIPLACE TX Series 06/2017 309 14.1.6.1 Replacing the Long Guide Slide Bearing, Left [03003994-xx] Parts, equipment and tools Fig.456: Guide slide bearing ● Guide s…
14 JEDEC Tray Feeder
14.1 SIPLACE JTF-ML
308 Service Manual SIPLACE TX Series 06/2017
Fig.454: Flat ribbon cable
► Take care not to fold the flat ribbon cable when
mounting the cover in the next step.
Fig.455: Fitting the cover
► Refit the cover.
14.1.6 Sliding Guides
1. 14.1.6.3 "Replacing the Short Guide Slide Bear-
ing, Left [03012425-xx]" [}310]
2. 14.1.6.2 "Replacing the Slide Guides, Right
[03058808Sxx]" [}309]
3. 14.1.6.1 "Replacing the Long Guide Slide Bear-
ing, Left [03003994-xx]" [}309]
14 JEDEC Tray Feeder
14.1 SIPLACE JTF-ML
Service Manual SIPLACE TX Series 06/2017 309
14.1.6.1 Replacing the Long Guide Slide Bearing, Left [03003994-xx]
Parts, equipment and tools
Fig.456: Guide slide bearing
●
Guide slide bearing back L200 [03003994-xx]
Overview
Fig.457: Guide slide bearing on JTF-ML-Adapter
Position of sliding guide
Removal / installation
► For removal and installation please refer to chapter 5.2 of the service manual "X Feeder
Care" [DE:00196601‑xx] [EN:00196602‑xx].
14.1.6.2 Replacing the Slide Guides, Right [03058808Sxx]
Parts, equipment and tools
Fig.458: Sliding guide parts
●
Sliding guide [03058808Sxx]
Overview
Fig.459: Guide slide bearing on JTF-ML-Adapter
Positions of guide slides
These two guide slides are identical.
Removal / installation
► For removal and installation please refer to chapter 5.1 of the service manual "X Feeder
Care" [DE:00196601‑xx] [EN:00196602‑xx].
14 JEDEC Tray Feeder
14.1 SIPLACE JTF-ML
310 Service Manual SIPLACE TX Series 06/2017
14.1.6.3 Replacing the Short Guide Slide Bearing, Left [03012425-xx]
Parts, equipment and tools
Fig.460: Front slider guide
●
Front slider guide L17 [03012425-xx]
Overview
Fig.461: Front slider guide on JTF-ML-Adapter
Position of sliding guide
Removal / installation
Fig.462: Front slider guide
► Remove the screw(2) (TorxT10) fastening the
front slider guide(1).
► Remove the slider guide.
► Place the new slider guide in the first position and
fasten the screw hand-tight.