00198150-02_SM_TX_en.pdf - 第92页
6 Gantries 6.2 X and Y Axis 92 Service Manual SIPLACE TX Series 06/2017 Fig.102: Operating of test device PG1-I - 3 6.2.6 Replacing the Y Axis Buffer (SIPLACE Service only) NOTICE SIPLACE Service This task may only be p…
6 Gantries
6.2 X and Y Axis
Service Manual SIPLACE TX Series 06/2017 91
Fig.101: Operating of test device PG1-I - 2
6 Gantries
6.2 X and Y Axis
92 Service Manual SIPLACE TX Series 06/2017
Fig.102: Operating of test device PG1-I - 3
6.2.6 Replacing the Y Axis Buffer (SIPLACE Service only)
NOTICE
SIPLACE Service
This task may only be performed by SIPLACE service technicians.
6.2.7 Replacing the X Scale (SIPLACE Service only)
NOTICE
SIPLACE Service
This task may only be performed by SIPLACE service technicians.
6.2.8 Replacing the Y Scale (SIPLACE Service only)
NOTICE
SIPLACE Service
This task may only be performed by SIPLACE service technicians.
6 Gantries
6.2 X and Y Axis
Service Manual SIPLACE TX Series 06/2017 93
6.2.9 Replacing Attachment Head Suspension [03124850-xx]
Parts, equipment and tools
●
Attachment complete head suspension [03124850‑xx]
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation. Observe the instructions in section 1.2 "Preparatory Work..." [}15].
► Remove the placement head.
Replacing the SIPLACE C&P20 P/M2 Head [}202]
Replacing the SIPLACE CPP/M Head [}206]
Fig.103: Head suspension
► Remove the two screws(1) fastening the head
suspension(2).
► Remove the head suspension carefully.