00198150-02_SM_TX_en.pdf - 第93页

6 Gantries 6.2 X and Y Axis Service Manual SIPLACE TX Series 06/2017 93 6.2.9 Replacing Attachment Head Suspension [03124850-xx] Parts, equipment and tools ● Attachment complete head suspension [03124850‑xx] Removal ► Sw…

6 Gantries

6.2 X and Y Axis

92 Service Manual SIPLACE TX Series 06/2017

Fig.102: Operating of test device PG1-I - 3

6.2.6 Replacing the Y Axis Buffer (SIPLACE Service only)

NOTICE

SIPLACE Service

This task may only be performed by SIPLACE service technicians.

6.2.7 Replacing the X Scale (SIPLACE Service only)

NOTICE

SIPLACE Service

This task may only be performed by SIPLACE service technicians.

6.2.8 Replacing the Y Scale (SIPLACE Service only)

NOTICE

SIPLACE Service

This task may only be performed by SIPLACE service technicians.

6 Gantries

6.2 X and Y Axis

Service Manual SIPLACE TX Series 06/2017 93

6.2.9 Replacing Attachment Head Suspension [03124850-xx]

Parts, equipment and tools

●

Attachment complete head suspension [03124850‑xx]

Removal

► Switch off the machine, disconnect it from the power supply and secure it to prevent

unauthorized reactivation. Observe the instructions in section 1.2 "Preparatory Work..." [}15].

► Remove the placement head.

Replacing the SIPLACE C&P20 P/M2 Head [}202]

Replacing the SIPLACE CPP/M Head [}206]

Fig.103: Head suspension

► Remove the two screws(1) fastening the head

suspension(2).

► Remove the head suspension carefully.

6 Gantries

6.2 X and Y Axis

94 Service Manual SIPLACE TX Series 06/2017

Installation

► Follow the removal instructions in reverse order for installation. Also observe the following in-

structions:

Fig.104: Setting the head suspension

► Position the screws(1) and (2) in relation to the head and the gantry.