4OM-1208-011_w.pdf - 第121页
AIVEMT -ID 0909-010 5. Consumables and Important Servicing Parts 1-61 5. Consumables and Important Servicing Parts 5.1 List of Consumables Listed below are the parts that may be consumed within one year . Consult our mar…
1-60-3
AIVEMT-ID
(5) Shake it in the rotational direction and confirm that the it does not
rotate. After that, pull out the filter replacement jig carefully so as
not to pull up the inserted filter together and stay afloat.
(6) Note the following and slide the filter fastener to the right to lock
the filter holder.
•
Confirm that the filter fastening claw is located at the upper
center of the filter holder.
•
Confirm that the ball plunger is locked.
Slide the filter fastener to the right.
Filter Unlocked Filter Locked
Locking Position of Filter
Fastening Claw
Ball Plunger Locked
Fig. 4A64
When the filter fastening claw cannot be locked after being slid
because it interferes with the sideface of the filter holder, it can
be assumed that a foreign substance exists in the hole or the filter
holder is not inserted sufficiently far into the hole.
Check the filter holder that has interfered with the sideface. If a
foreign substance exists in the hole, clean the filter holder to remove
the substance.
After the cleaning is completed and no foreign substance is found in
the hole, starting with Step (4).
Notice
Unless the filter holder is set correctly in place, a pickup error will occur
or the filter will come off and cause an interference with a head. The head
may also be damaged.
0606-009
4.6 Replacement Procedure of Vacuum Filters
AIVEMT-ID
0909-010
5. Consumables and Important Servicing Parts
1-61
5. Consumables and Important Servicing Parts
5.1 List of Consumables
Listed below are the parts that may be consumed within one year.
Consult our marketing department or sales agency whenever you need to
purchase these parts.
Table 4A14
Product Name Part No. Part Name Q'ty
Recommended
Q'ty/Years Note (a)
Exploded
View
Remarks
Nozzle (HV31) 016M1433
(630 152 8267)
ASSY, NOZZLE (HV31) 48 48 Fig. SA-2
Nozzle (HV51) 016M1434
(630 152 8472)
ASSY, NOZZLE (HV51) 48 48
Nozzle (HV01) 016M0929
(630 129 2878)
ASSY, NOZZLE (HV01) 48 48
Nozzle (PV81) 016M1482
(630 158 9084)
ASSY, NOZZLE (PV81) 48 48
Nozzle (HV02) 016M0930
(630 129 2885)
ASSY, NOZZLE (HV02) 48 48
Nozzle (HV03) 016M0931
(630 129 2892)
ASSY, NOZZLE (HV03) 48 48
Nozzle (HB03) 016M0932
(630 129 2908)
ASSY, NOZZLE (HB03) 48 48
Nozzle (HB04) 016M0933
(630 129 2915)
ASSY, NOZZLE (HB04) 48 48
Nozzle (HA04) 016M0934
(630 129 2922)
ASSY, NOZZLE (HA04) 48 48
Nozzle (HA05) 016M0935
(630 129 2939)
ASSY, NOZZLE (HA05) 48 48
Nozzle (HA09) 016M0936
(630 129 2946)
ASSY, NOZZLE (HA09) 48 48
Nozzle (PA05) 016M1074
(630 133 5407)
ASSY, NOZZLE (PA05) 48 48
Nozzle (PA07) 016M2168
(630 135 0295)
NOZZLE (PA07) 48 48
Vacuum Filter 225B0508
(630 126 9252)
AIR LINE EQPT 96 384 Fig. M-6
Fig. SA-1
Fluorine Sheet 212A2219
(630 136 6906)
GUIDE 4 4 Fig. DC-1
Fig. DD-1
Urethane Clamp 226J2299
(630 149 5804)
226J2403
(630 158 0340)
MECH, PARTS 4
4
4
4
Fig. DC-4
Fig. DD-4
Flat Ring 226A0256
(630 137 6028)
SEAL 4 16 Fig. DC-3
Fig. DD-3
For Roller on
Oscillating
Side in Cutter
Section
Cutter Blade 213D1294
(630 157 9795)
DISK 8 8 Fig. DC-3
Fig. DD-3
Note (c)
AIVEMT-ID
0909-001
5.1 List of Consumables
1-61-1
Note
(a) The numbers entitled "Recommended Q'ty/Year" indicate the
referential values.
(b) Refer to "3. Maintenance Spots" and "4. Maintenance Method" for the
replacement procedures of these parts.
(c) Replacement of the cutter blades involves some danger. Consult our
service personnel for detailed information.