4OM-1208-011_w.pdf - 第63页
AIVEMT -ID 0909-010 1.2 Preparation for Maintenance Specied lubrication tools (1) Brush Use a brush whose bristles do not come off if possible. Notice Do not use a brush for ball screws and splines. (2) Vinyl Gloves Use…
1-5
AIVEMT-ID
1.2.2 Preparation for Lubrication
Prepare for the specified types of grease and lubrication tools.
Specified Greases
•
DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSAN)
•
MOLYNOC GREASE AP1 (NIPPON OIL CORPORATION)
•
Silicon Grease KS64 (Shinetsu Kagaku)
Note
Before lubrication, wipe off old grease. Otherwise, the effect of grease and
oil will decrease.
Same Types of Lubricants
•
Grease Types equivalent to DAPHNE EPONEX GREASE No. 1
(IDEMITSU KOSAN)
Table 4A1
•
Grease Types equivalent to MOLYNOC GREASE AP1 (NIPPON OIL
CORPORATION)
Table 4A2
•
Grease Types equivalent to Silicon Grease KS64 (Shinetsu Kagaku)
Table 4A3
0606-009
1.2 Preparation for Maintenance
AIVEMT-ID
0909-010
1.2 Preparation for Maintenance
Specied lubrication tools
(1) Brush
Use a brush whose bristles do not come off if possible.
Notice
Do not use a brush for ball screws and splines.
(2) Vinyl Gloves
Use a pair of vinyl gloves to apply grease or oil by hand.
(3) Hand Grease Gun
Standard : KH-120
Part No. : 228A0022 (630 062 2577)
Maker : Yamada Corporation
Note
Use this gun only for DAPHNE EPONEX GREASE No. 1.
Reference
Refer to the attached instruction manuals for the hand grease gun for the
usage.
Fig. 4A4
1-6
AIVEMT-ID
0909-010
1.2 Preparation for Maintenance
1-7
(4) Syringe
Maker: TERUMO
This gun can be used for two types of greases.
Use the syringes and the nozzle properly.
Two Types of Greases : DAPHNE EPONEX GREASE No. 1
MOLYNOC GREASE
AP1
Fig.4A5
Table 4A6
228A0171
(630 133 3793)
216M0451
(630 062 2607)
216M0453
(630 062 2621)