4OM-1208-011_w.pdf - 第64页
AIVEMT -ID 0909-010 1.2 Preparation for Maintenance 1-7 (4) Syringe Maker: TERUMO This gun can be used for two types of greases. Use the syringes and the nozzle properly . T wo T ypes of Greases : DAPHNE EPONEX GREASE No…
AIVEMT-ID
0909-010
1.2 Preparation for Maintenance
Specied lubrication tools
(1) Brush
Use a brush whose bristles do not come off if possible.
Notice
Do not use a brush for ball screws and splines.
(2) Vinyl Gloves
Use a pair of vinyl gloves to apply grease or oil by hand.
(3) Hand Grease Gun
Standard : KH-120
Part No. : 228A0022 (630 062 2577)
Maker : Yamada Corporation
Note
Use this gun only for DAPHNE EPONEX GREASE No. 1.
Reference
Refer to the attached instruction manuals for the hand grease gun for the
usage.
Fig. 4A4
1-6
AIVEMT-ID
0909-010
1.2 Preparation for Maintenance
1-7
(4) Syringe
Maker: TERUMO
This gun can be used for two types of greases.
Use the syringes and the nozzle properly.
Two Types of Greases : DAPHNE EPONEX GREASE No. 1
MOLYNOC GREASE
AP1
Fig.4A5
Table 4A6
228A0171
(630 133 3793)
216M0451
(630 062 2607)
216M0453
(630 062 2621)
1-8
AIVEMT-ID
1.3 Items for Periodic Maintenance
The items (inspection, cleaning, lubrication, etc.) that require periodic
maintenance are classified and described based on each individual devices.
Reference
Refer to "2. Maintenance Check List" for the maintenance based on
frequency of use.
Notice
The * -marks represent that the items require maintenance only for
the first time.
Follow the
-marked maintenance cycle for the subsequent use.
Table 4A7-1
0606-009
1.3 Items for Periodic Maintenance