4OM-1208-011_w.pdf - 第135页

2-8 AIVEMT -ID W arning Codes Display Field A (Scope of Warning Messages) Display Field B (Details of W arning Messages) 012001 Recycling Conveyor (rear) Recycling conveyor (back) is ﬁlled. 012101 Recycling Conveyor (fro…

2-7

AIVEMT-ID

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

011001 Empty Feeder (rear)

Please set the feeder (back) that used by the pattern program.

011101 Empty Feeder (front)

Please set the feeder (front) that used by the pattern program.

011201

Transfer main loop

Press [POWER ON] button to activate Load Power circuit.

011301

Transfer main loop (backup, wide set)

Press [POWER ON] button to activate Load Power circuit.

011401

Zeroing not ﬁnish

Perform All zeroing

011501

Feeder communication not ﬁnish (rear)

Please wait for a while.

011601 Feeder communication not ﬁnish (front)

Please wait for a while.

011701

PCB position

Please position the PCB

011702 PCB position

Please locate the PCB in positioning 1.

011703 PCB position

Please locate the P.C.B in positioning 2.

011801

Data transfer not ﬁnish

It cann’t start because data is not set properly.

1901 Head irregular comp. conﬁrmation

Please perform all zeroing, turn off a vacuum and remove the component on the

head.

011a01 Nozzle stocker lower limit conﬁrmation

Perform All zeroing.

1b01 NL axis zero conﬁrmation

Perform All zeroing.

011c01 Nozzle arrangement conﬁrmation (rear)

The nozzle arrangement of the Current Program and the head (back) is different.

011d01 Nozzle arrangement conﬁrmation (front)

The nozzle arrangement of the Current Program and the head (front) is different.

011e01 Feeder reload (rear)

Please reload the feeder that has shortage of comp.

1f01 Feeder reload (front)

Please reload the feeder that has shortage of comp.

0606-009

2.2 List of Warning Messages

2-8

AIVEMT-ID

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

012001 Recycling Conveyor (rear)

Recycling conveyor (back) is ﬁlled.

012101 Recycling Conveyor (front)

Recycling conveyor (front) is ﬁlled.

012201 Recycling Conveyor (rear)

Comp. Trash Box (rear) is ﬁlled.

012301 Recycling Conveyor (front)

Comp. T

rash Box (front) is ﬁlled.

012501 Data check

Error was found in internal data of the control. Please change the model or try to

save the system data.

012601 Recycling Conveyor (rear)

Please connect the recycling conveyor (rear).

012701

Recycling Conveyor (front)

Please connect the recycling conveyor (front).

012801 T

ray safety door (rear)

Please close tray door(rear).

012901 Tray safety door (front)

Please close tray door(front).

012a01 Tray shortage Comp (rear)

Please supply comp

012b01 Tray shortage Comp (front)

Please supply comp

012c01 PCB Size X

Please check the PCB size X of pattern program data.

012d01 PCB Size Y

Please check the PCB size

Y of pattern program data.

012e01 Magazine existence,

Type difference

Please check the existence of a magazine, or the number of stages of a magazine.

012f01 Magazine existence,

Type difference

Please check the existence of a magazine, or the number of stages of a magazine.

0606-009

2.2 List of Warning Messages

2-9

AIVEMT-ID

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

013001 Load Power is not OFF.

Press [Emergency STOP] button to Load Power off.

013101 Feeder set Err

The feeder suppressor is tilting. (Rear)

013102

Feeder set Err

There is a Disengaged Latch. (Rear)

013103 Feeder set Err

The feeder suppressor is tilting. (Front)

013104 Feeder set Err

There is a Disengaged Latch. (Front)

013201 The number

Y of matrices (Y-axis operation limit)

The component of the speciﬁed number of matrices cannot be photoed with a PEC

recognition camera.

013202

The number Y of matrices (Y-axis operation limit)

It is only the parts of one sequence which can be photoed with a PEC recog

camera. The pick-up last pos teaching (pitch automatic teaching) cannot be

performed.

013203

The number Y of matrices (Y-axis operation limit)

This component cannot be photoed with a PEC recognition camera. The ﬁrst time

and the last extraction pos teaching (automatic teaching) cannot be performed.

013301 Press low Err

The vacuum pressure low was detected.

013302

Press low Err

The blow pressure low was detected.

013401 Linear Measure

Please install since the line sensor control version 2.14.

(It takes 30 seconds of about three minutes.)

013501 Conﬁrm the last placement position

Please set the placement settings to the placement. (head1)

013502 Conﬁrm the last placement position

Please set the placement settings to the placement. (head2)

013503 Conﬁrm the last placement position

Please set the placement settings to the placement. (head3)

013504 Conﬁrm the last placement position

Please set the placement settings to the placement. (head4)

013701 Incorrectly seated Nozstkr

Incorrectly seated Nozstkr 1 (rear)

013702 Incorrectly seated Nozstkr

Incorrectly seated Nozstkr 2 (rear)

013703 Incorrectly seated Nozstkr

Incorrectly seated Nozstkr 1 (front)

013704 Incorrectly seated Nozstkr

Incorrectly seated Nozstkr 2 (front)

0606-009

2.2 List of Warning Messages