4OM-1208-011_w.pdf - 第140页
2-13 AIVEMT -ID Machine Information Codes Display Field A (Scope of Machine Information) Display Field B (Details of Machine Information) 800901 Alarm For Shortage of Comp. The tape end was detected. 800902 Alarm For Sho…
2-12
AIVEMT-ID
Machine Information
Codes
Display Field A (Scope of Machine Information)
Display Field B (Details of Machine Information)
800701 Alternated Block
Comp. Missing(sensor)
800702 Alternated Block
Comp. Vertical(sensor)
800703 Alternated Block
Comp. Missing(recog.)
800704 Alternated Block
Comp. Recog. Error
800705 Alternated Block
Shortage of component
800706
Alternated Block
Start recovery mode.
800707 Alternated Block
Comp.
Thickness(sensor)
800708 Alternated Block
Comp. Pickup Diff.(recog.)
800709 Alternated Block
Comp. Reverse(recog.)
800801 Start Auto Recovery Mode
Comp. Missing (sensor)
800802
Start Auto Recovery Mode
Comp. Vertical(sensor)
800803
Start Auto Recovery Mode
Comp. Missing(recog.)
800804
Start Auto Recovery Mode
Comp. Recog. Error
800805 Start Auto Recovery Mode
Shortage of component
800806 Start Auto Recovery Mode
Comp. Thickness (sensor)
800807
Start Auto Recovery Mode
Comp.
Thickness (sensor)
800808 Start Auto Recovery Mode
Comp. Pickup Dif
f. (recog.)
800809 Start Auto Recovery Mode
Comp. Reverse (recog.)
80080b
Start Auto Recovery Mode
Feeder Reload Stop (Splicing)
0606-009
3.2 List of Machine Information
2-13
AIVEMT-ID
Machine Information
Codes
Display Field A (Scope of Machine Information)
Display Field B (Details of Machine Information)
800901 Alarm For Shortage of Comp.
The tape end was detected.
800902 Alarm For Shortage of Comp.
Few components to feed.
800a01 Product Information
Finished product interval :
800a02 Product Information
Auto run interval :
800a03 Product Information
Nozzle usage interval :
800a04 Product Information
Product started by RUN MODE "P
ASS" Operation.
800b01 Machine Interface Signal
No signal from furnace.
800c01 Cancel Recovery on
800d01 Maintenance W
arning
T
rash box fill up warning. (notice count over)
800d02 Maintenance Warning
Keep the machine condition. (maintenance cycle time : Oil-Checkup/Weekly)
800d03
Maintenance Warning
Keep the machine condition. (maintenance cycle time : Oil-Checkup/1-Monthly)
800d04 Maintenance Warning
Keep the machine condition. (maintenance cycle time : Oil-Checkup/3-Monthly)
800d05 Maintenance Warning
Keep the machine condition. (maintenance cycle time : Oil-Checkup/6-Monthly)
800d06 Maintenance Warning
Keep the machine condition.
(maintenance cycle time : Oil-Checkup/Designate #1)
800d07 Maintenance Warning
Keep the machine condition.
(maintenance cycle time : Oil-Checkup/Designate #2)
800d08 Maintenance Warning
Keep the machine condition.
(maintenance cycle time : Upkeep-Checkup/Nozzle)
800d09 Maintenance Warning
Keep the machine condition.
(maintenance cycle time : Upkeep-Checkup/Filter #1)
800d0a Maintenance Warning
Keep the machine condition.
(maintenance cycle time : Upkeep-Checkup/Filter #2)
800d0b Maintenance Warning
Keep the machine condition.
(maintenance cycle time : Designate-Checkup/Item #1)
0606-009
3.2 List of Machine Information
2-14
AIVEMT-ID
Machine Information
Codes
Display Field A (Scope of Machine Information)
Display Field B (Details of Machine Information)
800d0c Maintenance Warning
Keep
the machine condition.(maintenance cycle time : Designate-Checkup/Item
#2)
800d0d Maintenance Warning
Keep the machine condition.
(maintenance cycle time : Designate-Checkup/Item #3)
800d0e Maintenance Warning
Component box fill up warning. (notice count over)
800e01 Program Change Warning
Check the setup of machine. (program change completed)
800e02
Program Change Warning
Check the setup of machine.
(Program change completed. Run Mode changed to "PASS".)
801001 Auto Offset
Teach Information
Tape pocket recog error (run continue)
801
101 Nozzle diameter confirmation
The disagreement of the nozzle diameter was detected with the line sensor.
There is a possibility of the line sensor dirt and the nozzle dirt,please confirm
whether a different nozzle has adhered.
801201 Start Auto Head Recovery
Cpu Communication error occurred. (CPU2-CPU3)
801202 Start Auto Head Recovery
Head cam origin return action not complete. (Not CAM ORIGIN position)
801203 Start Auto Head Recovery
Head Driver communication is time out. (from cpu3 job)
801204 Start Auto Head Recovery
Nozzle change action not complete. (cam lock action NG)
801205 Start Auto Head Recovery
Head cam position return action not complete.
801206 Start Auto Head Recovery
Nozzle change action not complete. (cam free action NG)
801207 Start Auto Head Recovery
Nozzle change action not complete. (Not CAM ORIGIN position)
801208 Start Auto Head Recovery
Unselected Nozzle Drop.
801209 Start Auto Head Recovery
Co
mp
onent output error (Pickup error) is detected by nozzle level was position.
;Nozzle posture detection
80120a Start Auto Head Recovery
The selected nozzle was not at position. ;Nozzle posture detection
80120b Start Auto Head Recovery
Component output error (Others) is detected by nozzle level was position.
;Nozzle posture detection
0606-009
3.2 List of Machine Information