4OM-1208-011_w.pdf - 第187页

3-35 AIVEMT -ID 3.12 Automatic T eaching T able 4C14 Erroe ID Error Name, Description, Cause, and Remedy 600101 PCB recog camera & beam offset teach. ----- 600102 PCB recog camera & beam offset teach. ----- 60010…

100%1 / 237
3-34
AIVEMT-ID
Erroe ID Error Name, Description, Cause, and Remedy
510701 Auto Run Error
-----
510703 Auto Run Error
Head Mis-Pickup Detection
Please do the comp. discard operation
510801 Auto Run Error
Warm Start Error
Please position the PCB
510901 Auto Run Error
Comp.Vertical
-----
510902 Auto Run Error
Comp.Missing (Sensor)
-----
510903 Auto Run Error
Comp.recog.Error
-----
510904 Auto Run Error
Comp. Missing (Recog.)
-----
510a01 Auto Run Error
Pocket recog error
-----
510b01 Auto Run Error
Master bad mark detection is abnormal.
-----
510b02 Auto Run Error
Bad mark detection is abnormal.
-----
0606-009
3.11 Automatic Operation Error
3-35
AIVEMT-ID
3.12 Automatic Teaching
Table 4C14
Erroe ID Error Name, Description, Cause, and Remedy
600101 PCB recog camera & beam offset teach.
-----
600102 PCB recog camera & beam offset teach.
-----
600103 PCB recog camera & beam offset teach.
-----
600104 PCB recog camera & beam offset teach.
-----
600105 PCB recog camera & beam offset teach.
-----
600106 PCB recog camera & beam offset teach.
-----
600107 PCB recog camera & beam offset teach.
-----
600108 PCB recog camera & beam offset teach.
-----
600109 PCB recog camera & beam offset teach.
-----
600201 Comp. Recog. Camera offset teach.
The glass Jig can not able to be recognized.
-----
600202 Comp. Recog. Camera offset teach.
It entered in a specified frequency or less and it did not enter a permissible value.
-----
600301 Head Rotate Theta Axis offset
-----
600401 Head Rotate center offset teach
-----
600501 Reference mark position teach
-----
0606-009
3.12 Automatic Teaching
3-36
AIVEMT-ID
Erroe ID Error Name, Description, Cause, and Remedy
600601 Nozzle position offset teach
-----
600701 Fly recog. Offset teach
-----
600801 Feeder offset (A) teach
Please push the Feeder Ready SW
-----
600802 Feeder offset (A) teach
Feeder recog Mark Error
Manual Alignment
600803 Feeder offset (A) teach
Feeder connection is set in test mode.
-----
600804 Feeder offset (A) teach
-----
600805 Feeder offset (A) teach
Feeder recog. Process time over
-----
600901 Feeder offset (B) teach
-----
601000 Master nozzle level offset teach
-----
601101 Nozzle level offset teach
The nozzle level instruction result exceeded the tolerance.
-----
601200 Y Axis offset teach
-----
601301 Nozzle stocker offset teaching
Stocker Mark #1 Recognition Error
Please select Mnl Align Mark1 and adjust the manual.
601302 Nozzle stocker offset teaching
Stocker Mark #2 Recognition Error
Please select Mnl Align Mark2 and adjust the manual.
601400 Master nozzle level offset teach
-----
0606-009
3.12 Automatic Teaching