4OM-1208-011_w.pdf - 第61页
1-4 AIVEMT -ID • V acuum T weezers Use a pair of vacuum tweezers on the market. (Handy T ype) (Motor-Driven T ype) Fig. 4A3 V arious T ypes of V acuum T weezers 0606-009 1.2 Preparation for Maintenance
1-3
AIVEMT-ID
•
Air Gun
Do not use the air gun for any spots other than the specified ones.
If dirt and dust are dispersed, they may adhere to the sensors and moving
mechanisms, causing the machine to break down.
Fig. 4A1 Air Gun
•
Vacuum Cleaner
If the suction hole of the vacuum cleaner is changed to a smaller one, some
spots can be cleaned more easily.
•
Cleaning Paper
Use the attached pieces of paper (standard accessory).
•
Lens Cleaning Cloth
Use the attached pieces of cloth (standard accessory).
Fig. 4A2 Lens Cleaning Cloth
0606-009
1.2 Preparation for Maintenance
1-4
AIVEMT-ID
•
Vacuum Tweezers
Use a pair of vacuum tweezers on the market.
(Handy Type)
(Motor-Driven Type)
Fig. 4A3 Various Types of Vacuum Tweezers
0606-009
1.2 Preparation for Maintenance
1-5
AIVEMT-ID
1.2.2 Preparation for Lubrication
Prepare for the specified types of grease and lubrication tools.
Specified Greases
•
DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSAN)
•
MOLYNOC GREASE AP1 (NIPPON OIL CORPORATION)
•
Silicon Grease KS64 (Shinetsu Kagaku)
Note
Before lubrication, wipe off old grease. Otherwise, the effect of grease and
oil will decrease.
Same Types of Lubricants
•
Grease Types equivalent to DAPHNE EPONEX GREASE No. 1
(IDEMITSU KOSAN)
Table 4A1
•
Grease Types equivalent to MOLYNOC GREASE AP1 (NIPPON OIL
CORPORATION)
Table 4A2
•
Grease Types equivalent to Silicon Grease KS64 (Shinetsu Kagaku)
Table 4A3
0606-009
1.2 Preparation for Maintenance