00900194-01_SM_ASM ProcessLens_Dual-lane_EN.pdf - 第26页
3 Replacing spare parts 3.2 DLP 26 Service Manual ASM ProcessLens Dual-lane 09/2018 3.2.3 Checking the software version of the DLP module When the DLP module and the DMD module have been changed, a software check for the…
3 Replacing spare parts
3.2 DLP
Service Manual ASM ProcessLens Dual-lane 09/2018 25
► Unscrew and remove the two screws(1) that
connect the connector with the DMD module by
using an Allen key size 1.5.
► Carefully lift the connector of DMD module.
► Unscrew and remove the three screws(2) of the
DLP module by using an Allen key size 2.0.
► Remove the circuit board and replace it.
► The steps for the left and the right module are
identical.
Installation
Follow the removal instructions in reverse order for installation.
NOTICE
Modules are not interchangeable
Be aware that the two modules are not interchangeable.
3.2.2 Checking the DLP module
Requirements
●
DLP module is dismantled.
Checking the module
► Put the DLP module in its position.
► On the DLP interface board to the DMD(3) make
sure that the connector(2) is in the right position
and does not bend the pin(1). Use an external
light to check that the holes of the connector and
the drilling holes for the screws are in line.
► If the connector and the pin are in line a notice-
able click sound can be heard when the con-
nector is pressed down.
3 Replacing spare parts
3.2 DLP
26 Service Manual ASM ProcessLens Dual-lane 09/2018
3.2.3 Checking the software version of the DLP module
When the DLP module and the DMD module have been changed, a software check for the latest
Version is needed.
Requirements
●
Machine is switched on.
Checking the software version
► Open the DLP controller software on the computer.
► Double click on the application to run the software.
► In the Module ID input field(1) enter the number "00" for the left DLP module or "01" for the
right DLP module to test the left or the right DLP module and click on Connect(2).
► Click on Get Version(3) to check if the software version is running the latest version.
► Go to the ASM internal website to check the software version.
3 Replacing spare parts
3.2 DLP
Service Manual ASM ProcessLens Dual-lane 09/2018 27
3.2.4 Upgrading the firmware of the DLP module
When the firmware of the DLP module is not running the latest firmware, it needs to be updated.
Requirements
●
Machine is switched on.
●
The .rbf file is downloaded from the ASM internal website.
Upgrading the firmware
► Open the DLP firmware upgrade software on the computer.
► In the Module ID input field(1) enter the number "00" for the left DLP module or "01" for the
right DLP module to test the left or the right DLP module and click on Connect(2).
► Click on the browse button(3) to browse to the needed .rbf file.
► Double-click on the needed .rbf file.
► Click on the install button to install the latest version.
► Click on OK.
The DLP module is now running the latest version.