00900194-01_SM_ASM ProcessLens_Dual-lane_EN.pdf - 第47页
4 Replacing spare parts at the conveyor 4.3 Conveyor drive Service Manual ASM ProcessLens Dual-lane 09/2018 47 4.3 Conveyor drive 4.3.1 Replacing the conveyor drive Parts Fig.19: Conveyor drive 03093387‑xx DC drive moto…
4 Replacing spare parts at the conveyor
4.2 Lifting table
46 Service Manual ASM ProcessLens Dual-lane 09/2018
► In the Track Width Calibration area(4) select the right track.
► Click on the Lift Table Calibration button(5) to calibrate right track of the lifting table.
► Repeat the calibration the same way for the left track.
4 Replacing spare parts at the conveyor
4.3 Conveyor drive
Service Manual ASM ProcessLens Dual-lane 09/2018 47
4.3 Conveyor drive
4.3.1 Replacing the conveyor drive
Parts
Fig.19: Conveyor drive
03093387‑xx DC drive motor with synchronizing disk SXa
Equipment and tools
00326015‑xx Belt tension measuring device
00353832-xx Allen key set
00096290-xx Fork wrench set
Side cutter
Cable tie
4 Replacing spare parts at the conveyor
4.3 Conveyor drive
48 Service Manual ASM ProcessLens Dual-lane 09/2018
Overview
Fig.20: Overview of the conveyor drives
1 Conveyer Track 1 2 Conveyer Track 2
3 Conveyor drive input conveyor track 2 4 Conveyor drive placement area track 2
5 Conveyor drive output conveyor track 1 6 Conveyor drive output conveyor track 2
7 Width adjustment motor track 1 8 Width adjustment motor track 2
9 Conveyor drive input track 1 10 Conveyor drive placement area track 1