00900194-01_SM_ASM ProcessLens_Dual-lane_EN.pdf - 第36页
4 Replacing spare parts at the conveyor 4.1 Conveyor - overview 36 Service Manual ASM ProcessLens Dual-lane 09/2018 4.1 Conveyor - overview Fig.5: Conveyor overview - part 1 T1 Conveyer Lane 1 T2 Conveyer Track 2 1 Inpu…
4 Replacing spare parts at the conveyor
Service Manual ASM ProcessLens Dual-lane 09/2018 35
4 Replacing spare parts at the conveyor
DANGER
Observe User Manual
► Please observe the safety instructions in the user manual for all work!
CAUTION
Do not loosen or remove the wrong screws
The following applies to all work performed on the conveyor:
► Make sure that you do not loosen or remove any other screws except those ones ex-
plicitly mentioned. Loosening other screws could lead to irreparable misalignment or
damage to the conveyor.
CAUTION
Moving the conveyor rails
► The fixed conveyor rail is fastened by screws, the moveable conveyor rail can be
moved by carefully pulling on the toothed belt of the width adjustment.
► After moving the conveyor rail manually, you may need to teach the conveyor rail posi-
tion during the conveyor reference run and recalibrate the light barriers.
4 Replacing spare parts at the conveyor
4.1 Conveyor - overview
36 Service Manual ASM ProcessLens Dual-lane 09/2018
4.1 Conveyor - overview
Fig.5: Conveyor overview - part 1
T1 Conveyer Lane 1
T2 Conveyer Track 2
1 Input area
2 Placement area
3 Output area
4 Lifting tables
4.2 "Lifting table" [}38]
5 Conveyor drives
4.3 "Conveyor drive" [}47]
4 Replacing spare parts at the conveyor
4.1 Conveyor - overview
Service Manual ASM ProcessLens Dual-lane 09/2018 37
Fig.6: Conveyor overview - part 2
1 Width adjustment
4.4 "Width adjustment" [}56]
2 Conveyor belts
4.5 "Conveyor belt, belt drive and hexagonal shaft" [}63]
3 Light barriers
4.6 "Fiber optic cables and laser light barriers" [}75]
4 Conveyor control TSP420
4.7 "Boards" [}93]
The flexible dual conveyor has two conveyor tracks that are electrically and mechanically inde-
pendent of one another.
By default, the fixed conveyor rails are in the "outer" position.
Optionally, the fixed conveyor rail can be selected - right/right or left/left.
Setting the fixed conveyor rail
The PCB dual conveyor can also be operated as a flexible single conveyor. For SIPLACE Pro jobs,
a separate license is required. Mapping at the station is possible without a separate license.