00193891-0702_AI_LP_Barcode_DE+EN.pdf - 第158页

2 PCB barcode scanner assembly instructions SIPLACE 2.7 Installing the PCB barcode scanner 10/2009 Edition 158 : Set the relevant switch for the co nnected scanner to OFF and the others to ON. 2 : Attach the barcod e dis…

100%1 / 272
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.7 Installing the PCB barcode scanner
157
: Run the cable through the supporting clips along the rail.
: Label the connecting plugs for the barcode scanner (see picture below).
: Pull the interface cable for the PCB barcode (00
370329-xx, SIPLACE HF) out of the machine
frame.
Interface cable
Plug
2
: Plug the connectors for the interface cable, barcode scanner and protective earth into the bar-
code distributor:
Interface cable
X5
Barcode scanner X1
Single conveyor topside
X2 Single conveyor underside
X3 Dual conveyor topside
X4 Dual conveyor underside
X1 - X4: Barcode scanner
Interface cable
Protective earth (PE)
2
2 PCB barcode scanner assembly instructions SIPLACE
2.7 Installing the PCB barcode scanner 10/2009 Edition
158
: Set the relevant switch for the connected scanner to OFF and the others to ON.
2
: Attach the barcode distributor using Velcro tape.
Barcode distributor
2
: Connect the protective earth to the side of the conveyor trough and attach the grounding point.
Protective earth connection
Grounding point
2
: Close all protective covers and protective hoods.
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.7 Installing the PCB barcode scanner
159
Attach the warning labels 2
: Attach the laser warning label to the Makrolon window on the input belt.
Th
e label is needed because a laser class 2 sensor
beam that is directed upwards while the
machine is in use could be directed outside.
Position of the label
2
: Stick the warning label W216 (item no. 03010316-xx) onto the cover, beside the main switch
and above the warning label concerning following the safety instructions in the operating in-
structions.
Main power switch
Warning label W216
Warning label
for safety
instructions
2