00193891-0702_AI_LP_Barcode_DE+EN.pdf - 第244页
2 PCB barcode scanner assembly instructions SIPLACE 2.11 PCB barcode scanner configuration 10/2009 Edition 244 : Click on "Reading trigger parameters". Fig. 2.1 1 - 37 Reading trigger para mete rs 2 : Activate …
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.11 PCB barcode scanner configuration
243
: Select the "Device conf." tab.
2
: Enter the device number as shown in the table.
Left-hand PCB conveyor track (2)
on dual conveyor option only
Right-hand PCB conveyor
track
(1)
PCB barcode scanner ‘topside’
3 1
PCB barcode scanner
‘topsi
de’
PCB conveyor
PCB barcode scanner
‘underside’
4 2
2
2
2
2
2
2
2
2 PCB barcode scanner assembly instructions SIPLACE
2.11 PCB barcode scanner configuration 10/2009 Edition
244
: Click on "Reading trigger parameters".
Fig. 2.11 - 37 Reading trigger parameters
2
: Activate the functions as shown in the above screenshot.
: Click on OK to confirm your input.
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.11 PCB barcode scanner configuration
245
: Select the "Code conf." tab.
Fig. 2.11 - 38 Code configuration
2
: Check the Data Matrix check box.
Note on scanning 1D barcodes:
1. If the 2D barcode scanner also has to scan 1D barcode
s, then the appropriate barcode types
must be activated on the right-hand side. In th
is way, the hardware decoder is active and
the analysis takes place as for a normal 1D barcod
e scanner (provided that the barcode to
be scanned is placed crosswise on th
e PCB thus allowing fast analysis).
2. Check the 360° check box. This switches off the hard
ware decoder so that the analysis takes
place via the image analysis, as for a 2D barcode. If the 360° check box is checked, then
the maximum bar thickness and height of the 1D
barcodes used must be entered under the
"Edit" button. The barcode may be positioned as requir
ed on the PCB (although this may
extend the analysis time).
3. If the "Use binary information" check box is checke
d in the "Edit" menu, the hardware decoder
is switched on again. If it is unable to read the ba
rcode, then an attempt is made to read the
barcode using the image analysis (long analysis times are possible).
2
2