00193891-0702_AI_LP_Barcode_DE+EN.pdf - 第224页
2 PCB barcode scanner assembly instructions SIPLACE 2.11 PCB barcode scanner configuration 10/2009 Edition 224 Convention for barcode scanner numbering : Left-hand PCB conveyor track (2) on dual conveyo r option only Rig…
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.11 PCB barcode scanner configuration
223
2.11.6 Settings on the 1D barcode scanner
The 1D barcode scanner CLV41x or CLV42x is configured using several barcodes that are printed
on a sheet of paper. No online connection to the 1D barcode scanner is required.
The barcode is configured with the CLV software (version 4.1) from SICK.
NOTE:
The CLV software can be downloaded from the download center or from the Internet at
www.sick.de.
2.11.6.1 Configuring the barcodes for the 1D barcode scanner
: Install the CLV software by running CLVsetup.exe.
: The installation is dialog-driven
. Remember to select the unit " Inch or metric".
: Start the CLV program using Start--> Programs--> CLV Setup --> CL
V Setup V4.1 .
Fig. 2.11 - 8 Select the device type
: Select the barcode scanner type under Device.
: Leave all the settings in the ’Reading con
figuration’ window unchanged.
: Enter 1, 2, 3 or 4 in the 'Device no.' box in the
’Device configuration' window.
2 PCB barcode scanner assembly instructions SIPLACE
2.11 PCB barcode scanner configuration 10/2009 Edition
224
Convention for barcode scanner numbering:
Left-hand PCB conveyor track (2)
on dual conveyor option only
Right-hand PCB conveyor
track (1)
PCB
ba
rcode scanner ‘topside’
3 1
PCB barcode scanner
‘topside’
PCB co
nveyor
PCB barcode scanner
‘underside’
4 2
2
Fig. 2.11 - 9 ’Device configuration’
: Click on the ’Reading Trigger Parameters' button.
– In the ’Reading Trigger Source’ box, check the ’Sensor input (Active High)’ option
– In the ’Read clock end’ box, check the ’Timer (ms)
’
option and enter 5000 in the input box.
: In the ’Output on Good Read’ box, click on
the ’Immediate’ option.
: Click on OK to confirm your settings.
Fig. 2.11 - 10 "Reading Trigger Parameters" setting
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.11 PCB barcode scanner configuration
225
: Select the scan code in the ’Code conf.’ box.
Fig. 2.11 - 11 Configure barcode types
: Click on the barcode types to be read by the 1D barcode scanner.
: You can leave the settings in the ’Host Interface’ window
unchanged since you will not be es-
tablishing an online connection with the barcode scanner.
Fig. 2.11 - 12 Host interface