00193891-0702_AI_LP_Barcode_DE+EN.pdf - 第194页
2 PCB barcode scanner assembly instructions SIPLACE 2.7 Installing the PCB barcode scanner 10/2009 Edition 194 Fitting the pr otective cover 2 : Remove the film from the new protective cover and its component s. : Use th…
Terminal panel
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.7 Installing the PCB barcode scanner
193
2
The jumper assignment for the interface (SIPLACE / SMEMA) on the conveyor control must cor-
respond to the current interfaces otherwise the
barcode data will not be forwarded correctly to the
station software. 2
J1 = SIPLACE/SMEMA upstream station
J2 = SIPLACE/SMEMA downstream station
SIPLACE = setting 1-2
;
SMEMA setting 2-3. 2
: Swing the pneu
matic unit back (on the other side of the machine) and screw it on.
2
2 PCB barcode scanner assembly instructions SIPLACE
2.7 Installing the PCB barcode scanner 10/2009 Edition
194
Fitting the protective cover 2
: Remove the film from the new protective cover and its components.
: Use the hing
es from the old cover for the new one.
Remove the white packing discs from the sides.
Screw a hinge onto the cover.
2 screws
2
2
: Screw the protective plate and magnet to the protective cover.
Protective plate
MagnetMagnet
2
2
: Remove the cover switch actuator from the old cover and fit it onto the new one. Only do the
screws up loosely so that the actuator can be accurately positioned later.
2
2
2
2
2
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.7 Installing the PCB barcode scanner
195
: Place the other hinge in the hole and screw the protective cover to the hinge.
2 screws
2
2
: Align the cover switch and actuator.
: Screw the oppo
site magnet plate onto the machine cross-member.
2
2
2
2
2