ntcat.pdf - 第9页

9 Consult “Precautions” page 327 before use, installation or service of MAC Valves.. Section 1 Direct solenoid and solenoid pilot operated valves

100%1 / 280
8
Consult “Precautions” page 327 before use, installation or service of MAC Valves..
MAC Valves 18 month guarantee plus lifetime coil guarantee
The MAC Valves organization has established a reputation over many years for fulfilling the needs and requirements of the users of its products.
All MAC Valves are quality products specifically designed and built for long and rugged service. Therefore, all valves appearing in this catalog are guaranteed
for a period of eighteen months from the original date of shipment from our factory. In addition to this eighteen month Guarantee, MAC Valves, Inc. guarantees
the electrical coils on every one of the valves listed in this catalog for life. LIMITATION OF GUARANTEE: This Guarantee is limited to the replacement or
rebuilding of any valve which should fail to operate properly. Valves, under the MAC Guarantee, must be returned (with or without bases) transportation prepaid
and received at our factory within the Garantee period. They will be returned to the customer at the expense of MAC Valves, Inc., and will carry the same
guarantee as provided under the Flat Rate Rebuild Program. DISCLAIMER OF GUARANTEE: No claims for labor, material, time, damage or transportation are
allowable nor will any valve be replaced or rebuilt under this guarantee which has been damaged by the purchaser not in the normal course of its use and
maintenance during the warranty period. The guarantee does not apply to loss or damage caused by fire, theft, riot, explosion, labor dispute, act of God, or
other causes beyond the control of MAC Valves, Inc. MAC Valves, Inc. shall in no event be liable for remote, special or consequential damages under the MAC
Guarantee, nor under any implied warranties, including the implied warranty of merchantability.
The above Guarantee is our manner of extending the engineering and service resources of the MAC Valves, Inc. organization to assure our customer long, and
continued satisfaction.
The flat rate rebuild program
Valves no longer covered by the MAC Guarantee can be rebuilt under the Flat Rate Rebuild program. Our constant research and testing program is dedicated to
extending the life of our valves and making them even more reliable under the most adverse operating conditions. Valves returned under this program are
completely disassembled , inspected, rebuilt to current operating standards wherever possible, tested and returned within a few weeks for a nominal flat rate
charge. All rebuilt valves carry for 90 days from date of shipment from our factory the same guarantee as provided for new valves.
Pneumatic functions
All valves inside the MAC product range allow for multiple pneumatic functions.
Direct solenoid and solenoid pilot operated valves could be used as 2 ways, 3 ways (NO, NC) or 4 ways.
When plugging one orifice to achieve a 2 way function (or 3 way), it will not affect the valve operation.
Introduction
18
18
10 0
%
10 0
%
10 0
%
10 0
%
MONTHS
WARRANTY
OF
PRODUCTION
TESTED
• Direct solenoid valves 3 ways : universal
The following functions are available
- 3 ways NC
- 3 ways NO
- 2 ways NC
- 2 ways NO
- Selector
- Divertor
• Direct solenoid valves 4 ways :
The following functions are available
- 4 ways
- 3 ways NC
- 3 ways NO
- 2 ways NC
- 2 ways NO
- Divertor
• Pilot operated valves 3 ways :
The following functions are available
- 3 ways NC
- 3 ways NO
- 2 ways NC
- 2 ways NO
- Selector : the highest pressure is connected to the IN port; the lowest pressure
is connected to the EXH port. (Use external pilot when the highest pressure
is less than 25 PSI)
- Divertor (consult factory)
• Pilot operated valves 4 & 5 ways :
The following functions are available
- 4 or 5 ways
- 3 ways NC
- 3 ways NO
- 2 ways NC
- 2 ways NO
- Selector (except 3 positions)
- Divertor (consult factory).
EVERY VALVE FULLY TESTED PRIOR TO SHIPMENT
9
Consult “Precautions” page 327 before use, installation or service of MAC Valves..
Section 1
Direct solenoid and solenoid pilot operated valves
P. 15
P. 19
P. 23
P. 33
P. 35 P. 41 P. 43
P. 47 P. 49
P. 53 P. 55 P. 59 P. 61
P. 65
P. 69
P. 73
P. 77
P. 81
P. 95 P. 97
P. 103 P. 105
P. 111 P. 113
P. 121
P. 125 P. 127
P. 133 P. 135
P. 141 P. 143
P. 147 P. 149
P. 159
P. 161 P. 163
P. 173
P. 177
P. 181 P. 165
P. 187 P. 189
P. 193 P. 195
10
Consult “Precautions” page 327 before use, installation or service of MAC Valves..
Function Port size Flow (Max) Cv Individual mounting
Direct solenoid and
3/2
3/2 - 2/2
3/2
3/2
3/2
3/2
3/2
3/2
3/2
3/2 - 2/2
3/2 - 2/2
3/2 - 2/2
5/2
4/2
4/2
5/2 - 5/3
5/2
5/2
5/2
5/2 - 5/3
5/2
5/2 - 5/3
5/2 - 5/3
5/2 - 5/3
5/2 - 5/3
5/2 - 5/3
5/2 - 5/3
5/2 - 5/3
5/2 - 5/3
5/2 - 5/3
5/2 - 5/3
0.082
0.12
0.3
0.3
0.3
0.4
0.4
0.5
1.2
1.5
20.0
60.0
0.1
0.3
0.3
0.4
0.4
0.5
1.0
1.1
1.1
1.0
1.2
1.2
3.8
3.4
1.0
0.43
1.8
3.0
6.1
Inline
Sub-base
non “plug-in”
Sub-base
“plug-in”
Sub-base/
manifold base
non “plug-in”
with latching
solenoid
Sub-base/
manifold base
“plug-in”
with latching
solenoid
Valve only –
No base
non “plug-in”
Conform to
ISO 5599/1
Valve only –
No base
“plug-in”
Conform to
ISO 5599/2
Valve only –
No base
non “plug-in”
Conform to
ISO 15407/1
M3
M5 - #10-32
1/8”
1/8” - #10-32
1/8” - 5/32
1/8”
#10-32 - 1/4”
O.D. tube receptacle
1/8” - 1/4”
1/8” - 1/4”
O.D. tube receptacle
1/8” - 1/4”
3/4” - 1”
1 1/2” - 2” - 2 1/2”
M5 - #10-32
1/8” - #10-32
1/8” - 5/32
#10-32 - 1/4”
O.D. tube receptacle
#10-32 - 1/4”
O.D. tube receptacle
1/8” - 1/4”
1/8”
1/8”
1/8”
1/8” - 1/4”
1/8” - 1/4” - 3/8”
1/4” - 3/8”
3/8” - 1/2”
1/4” - 3/8” - 1/2”
1/4”
1/8”
1/4” - 3/8”
3/8” - 1/2”
1/2” - 3/4”
O.D. pressed-in
tube receptacle
O.D. pressed-in
tube receptacle