1_H24维修手册.pdf - 第109页

E d i ti o n 5 .0 H 24 H ea d R e p a i r T r a i n i n g T e x t fo r S e r v i c e E n g i n e e r s R e p l a c i n g th e b a tte r y a n d r e s e tti n g th e s e r v o m o to r o r i g i n s 9 . 2 P r e pa ri ng f…

100%1 / 214
Edition 5.0 H24 Head Repair Training Text for Service Engineers
Replacing the battery and resetting the servo motor origins
3. Attach the head to the module.
4. Set the NXT application installation disc 1 in the PC (it must be the same version as that
installed on the machine) and double-click DVD/Disc1/NXT/To ol /NXT3/setup.exe.
When the installation screen displays, click [Next] to install.
5. When the following screen displays, select the installation folder, and then click [Next].
6. Once installation is complete, the following shortcut displays on the desktop. This short
cut can be used to start the Motion Adjustment Tool. This completes the installation
procedure.
Double-click
FK-9F50-08-0E
9-2
FUJI MACHINE MFG. CO., LTD.
CONFIDENTIAL
Downloaded at 2015/06/18 12:05:48 (JST) by 5LUF0998
(C) FUJI Machine Mfg. Co., Ltd. All Rights Reserved. 2015/06/18 doc3elPkSB8
Edition 5.0 H24 Head Repair Training Text for Service Engineers
Replacing the battery and resetting the servo motor origins
9.2 Preparing for MT Reset
1. Follow the procedure in section 8.1 of this text to turn the control power ON.
9.3 MT Reset
1. Double-click the shortcut on the desktop to open the Motion Adjustment Tool.
2. Select [Communication] - [Connect].
3. Enter the base IP address and module number in the following dialog, and then press
[OK] to connect.
Base IP address
Module No.
FK-9F50-08-0E
9-3
FUJI MACHINE MFG. CO., LTD.
CONFIDENTIAL
Downloaded at 2015/06/18 12:05:48 (JST) by 5LUF0998
(C) FUJI Machine Mfg. Co., Ltd. All Rights Reserved. 2015/06/18 doc3elPkSB8
Edition 5.0 H24 Head Repair Training Text for Service Engineers
Replacing the battery and resetting the servo motor origins
4. Once connected, the following screen displays.
5. Right-click the IP address and then select [Collect Network Configuration] to display the
Axis State” screen. (Equivalent to wake).
FK-9F50-08-0E
9-4
FUJI MACHINE MFG. CO., LTD.
CONFIDENTIAL
Downloaded at 2015/06/18 12:05:48 (JST) by 5LUF0998
(C) FUJI Machine Mfg. Co., Ltd. All Rights Reserved. 2015/06/18 doc3elPkSB8