WinMCS_Manual(ENG) rev1.0.pdf - 第11页

11 Service Manual Koh Y oung T echnology Inc. 1. Axis Move JoyStick By using JoySti ck, the probe can move manually to the certain positio n on axis as set in the moving range setting v alue. T o activate Z axis control …

WinMCS_Manual(ENG) rev1.0

Koh Young Technology Inc.

3.2. Axis Move

It is able to check and control manually the X, Y, Z motion and Servo motor On/Off.

When you check the Z Axis, checkbox Z has to be checked

(Location: Menu  Manual Motion  Axis Move)

3.2.1. Axis Move Dialog

1. X-Axis & Y-Axis & Z-Axis

It is able to check the current state of -+Limit sensors and Servo On/Off. If X/Y/Z–AXIS

SERVO ON button is pressed, the button is turned into X/Y/Z–AXIS SERVO OFF button

and if the OFF button is pressed again, it is turned into ON reversely.

(The red color LED indicator in Axis Check also shows whether it is currently ON or OFF)

Service Manual

Koh Young Technology Inc.

1. Axis Move JoyStick

By using JoyStick, the probe can move manually to the certain position on axis as set in the

moving range setting value. To activate Z axis control bar, the check button of Z should be

enabled.

2. Axis Position

It displays the current absolute position value in um unit on all X, Y, and Z axis.

3. Z-Axis Enable

When this button is checked, manual Z axis movement is possible. (Only applicable for

machine with Z axis motor attached)

4. Moving range setting

Input the relative distance for moving to the desired position.

WinMCS_Manual(ENG) rev1.0

Koh Young Technology Inc.

3.3. Axis Position

When the motion moves, you can check the position of X, Y, Z Axis and speed repeatability.

The axis is able to move to specific position repeatedly.

Location: Menu  Manual Motion  Axis Position

3.3.1. Axis Position Dialog

1. Get Position: It displays the current position of Motion

2. Clear: It clears up the log records in a line

3. Clear All: It clears up the records in Log window

4. Move To: When you click Move To button after clicking the log of that line, it moves to the

position.

5. Move Next Pos.: It moves to the next position

6. X-Y Plot: The following window is activated and it displays the moving line of motion.

If you click the following window, the motion moves to the position.