WinMCS_Manual(ENG) rev1.0.pdf - 第61页
61 Service Manual Koh Y oung T echnology Inc. 7. DIAGNOSIS This is a functio n to diagnose the co mpositio n of MCS S/W or the status of STMC and Motion. 7.1. ST A TUS VIEW (Koh y oung Le vel) 1. CONVEYOR ST A TUS It is …
60
WinMCS_Manual(ENG) rev1.0
Koh Young Technology Inc.
6. MACHINE CALIBRATION (Kohyoung Level)
It describes how to use Machine Calibration Wizard.
6.1. MACHINE CALIBRATION WIZARD
N
N
o
o
t
t
e
e
For more information, please refer to X,Y Machine Calibration manual.
61
Service Manual
Koh Young Technology Inc.
7. DIAGNOSIS
This is a function to diagnose the composition of MCS S/W or the status of STMC and
Motion.
7.1. STATUS VIEW (Kohyoung Level)
1. CONVEYOR STATUS
It is to check the location of PCB and the status of SMEMA.
2. STMC Communication Status
It is to check the communication status of STMC board.
The communication log files between MCS and STMC is saved in
C:\Kohyoung\KY3030\MCSLOG\STMCComhis.log.
N
N
o
o
t
t
e
e
If there are any problem regarding conveyor belt and width control, please refer to the
above file.
62
WinMCS_Manual(ENG) rev1.0
Koh Young Technology Inc.
7.1.1. Diagnosis for Conveyor (Kohyoung Level)
It is a function to diagnose all sorts of conveyor sensors and sequence when the inspection
is in progress.
It shows the status of conveyor PCB visually. The status of IO, board and SMEMA
regarding conveyor can be checked.
You can check the related I/O, belts or etc. by clicking on the right mouse button.