WinMCS_Manual(ENG) rev1.0.pdf - 第31页

31 Service Manual Koh Y oung T echnology Inc.  DU AL L ANE FIX TYPE & CONV . RAI L FIX POSI T ION 1. Fixed T ype: It is to set t he fixed rail of conveyor . ( D ua l Lane Option) 0. 1-3 Lane Fixed: No. 1 and No. 3 L…

WinMCS_Manual(ENG) rev1.0

Koh Young Technology Inc.

 Machine Origin Offset

This is to use full stroke of each axis. When the probe moves to (-)Limit of X axis, (+)Limit

of Y axis as following picture, the center of Z axis(probe) is not completely matched to the

Limit due to the nature of machine. The offsets, which occur here, are compensated in this

option. (Factory Setting)

 CONVEYOR WIDTH

When the rail width is adjusted, the limit of MIN/MAX rail width can be set here in this

item. If the values are not within min-max range when the conveyor width is adjusted,

errors occur.

Service Manual

Koh Young Technology Inc.

 DUAL LANE FIX TYPE & CONV. RAIL FIX POSITION

1. Fixed Type: It is to set the fixed rail of conveyor. (Dual Lane Option)

0. 1-3 Lane Fixed: No. 1 and No. 3 Lanes are fixed.

1. 1-4 Lane Fixed: No. 1 and No. 4 Lanes are fixed.

2. Fix Position, Max Position: This is to set the fixed position and maximum position of each

lane.

WinMCS_Manual(ENG) rev1.0

Koh Young Technology Inc.

4.3. VELOCITY & PID SETTING

This is to set the values with regard to motion control of axes such as velocity, PID gain

value, and etc. The values in this tab shouldn’t be changed until it is allowed by an

authorized person (Factory Setting)

Location: Menu  Settings  SystemSettings  Velocity & PID

4.3.1. VELOCITY & PID SETTING