WinMCS_Manual(ENG) rev1.0.pdf - 第20页
20 WinMCS_Manua l(ENG) rev 1.0 Koh Y oung T echnology Inc. 3.6. Laser Mode N N o o t t e e For more information about Laser mode, see Laser Setting Manual.
19
Service Manual
Koh Young Technology Inc.
Step Zoom Jog
1. Move Head:
It moves the head motor as much as the input value
ex) 69 + enter: Head motor moves as much as 69mm.
2. Move Lens:
It moves the lens motor as much as the input value
ex) 30 + Lens: Lens Motor moves as much as 30mm.
ZOOM Axis Status & IO Status
1. HEAD STATE:
It displays the state of Head Motor (Servo On, Limit(+), Run, EMG, Origin, Done)
2. LENS STATE:
It displays the state of Lens Motor (Servo On, Limit(+), Run, EMG, Origin, Done)
3. HEAD IO:
It checks whether the motion of Head Motor is completed or not.
4. LENS IO:
It checks whether the motion of Head Motor is completed or not.
5. HEAD HOME:
Head Motor Homing
6. LENS HOME:
Lens Motor Homing
20
WinMCS_Manual(ENG) rev1.0
Koh Young Technology Inc.
3.6. Laser Mode
N
N
o
o
t
t
e
e
For more information about Laser mode, see Laser Setting Manual.
21
Service Manual
Koh Young Technology Inc.
4. SETTINGS PARAMS
It is able to check the setup state of WinMCS and to change it.
Location: Menu Settings SystemSettings General
4.1. GENERAL SETTING
It shows all the settings with regard to motion control of machine, the setting should be
matched correctly with the type of machine. More details will be covered below.
4.1.1. GENERAL SETTING