WinMCS_Manual(ENG) rev1.0.pdf - 第57页

57 Service Manual Koh Y oung T echnology Inc. 4.8. ZOOM L A NE 1 It is setting fo r Step Zoom opti on. (Not appli cable to Dual Lane) Location: Menu  Settings  Syste mSettings  ZOOMLANE1 4.8.1. ZOOM LANE 1 1. Zoom Fir…

WinMCS_Manual(ENG) rev1.0

Koh Young Technology Inc.

 Compensation Option

It is to set the compensation algorithm when Multi Fiducial inspection.

1. Z MOVE

0. Don’t Use: Used for the inspection with Multi Fiducial + Auto Scale factor. Z_Move is

not used. (Used when the warpage is not severely seen.)

1. Use: Used for the inspection with Multi Fiducial + Auto Scale factor + Z_Move

(Used when the warpage is severely seen)

2. Z MAP EXPORT

1. Use: When Multi + Auto Scale factor + Z_Move inspection are finished, PCB Z_Map .csv

file can be exported.

Path: C:\Kohyoung\KY-3030

3. Method: Compensation method

0. Normal: Using the shortest distance scale for warpage compensation

1. Plane Surface: Using the horizontal plane for warpage compensation

2. Avg Comp: Using the neighbor height of FOV for average warpage compensation

3. Spline Comp: Using B-Spline for warpage compensation

4. Spline + Plane: Using the horizontal plane & Spline for warpage compensation

4. FID RETRY:

This is a function to compensate warpage using Fiducial Z axis compensation. When the

warpage occurs at the fiducial position, it compensates it to the focusing position.

(maximum 3 times retry)

0. Don’t Use: The function of Fiducial Retry is not used.

1. Use: The function of Fiducial Retry is used.

Service Manual

Koh Young Technology Inc.

4.8. ZOOM LANE 1

It is setting for Step Zoom option. (Not applicable to Dual Lane)

Location: Menu  Settings  SystemSettings  ZOOMLANE1

4.8.1. ZOOM LANE 1

1. Zoom First~Fifth Position

Head Position: Head Axis focusing value of Zoom Position

LENS Position: Lens Axis focusing value of Zoom Position

OFFSET X: In case of Mix Job File, Camera Offset X value when it moves to other step from

default step.

OFFSET Y: In case of Mix Job File, Camera Offset Y value when it moves to other step from

default step.

2. STEP ZOOM MODE

StepZoom Comport Setting

3. ZOOM STROKE(Unit:mm)

It is to set the max stroke value of Head, Lens Axis.

WinMCS_Manual(ENG) rev1.0

Koh Young Technology Inc.

5. TOWER LAMP SETTING

It is setting for Lamp On/Off and alarm for each machine mode.

5.1. TOWER LAMP SETTING