00197394-03_AI_Smart-Pin-Support_X-S_DE_EN.pdf - 第92页
2 Brief Description 2.5 Overview of Parts 92 Assembly Instructions / Montageanleitung SIPLACE X-Series S Smart Pin Support 05/2019 Fig.10: Holder for Q10 magazine Holder for Q10 magazine assembly [03088072-xx] Fig.11: …
2 Brief Description
2.5 Overview of Parts
Assembly Instructions / Montageanleitung SIPLACE X-Series S Smart Pin Support 05/2019 91
2.4.4 Installation Positions of COT Insert and Manual Table (Table Positions)
Fig.7: Installation positions
The following installation positions apply to
the SIPLACE X-Series S:
1. Installation position 1
COT insert: X4i S
2. Installation position 2
COT insert, manual table: X4i S
3. Installation position 3
COT insert, manual table: X2 S, X3 S,
X4 S
2.5 Overview of Parts
You will need various parts, which differ according to the configuration and machine type used. For
more information, read section 2.4 "Possible Configurations/Required Equipment" [}82].
The list below includes all parts which might be needed:
Fig.8: Pin picker left and right
R = Pin picker right [03089904-xx]
L = Pin picker left [03089903-xx]
The two pin pickers differ only in the base
plate.
1. Compressed air valves
2. Pneumatic cylinder
3. Control board
4. Electrical cable and pneumatic hose
5. Base plate
6. Linear unit
7. Pin interface
NOTICE!
The X series S pin pickers are fitted
with captive screws.
.
Fig.9: W5 magazine
W5 magazine for 5 pins
[00119998-xx]
2 Brief Description
2.5 Overview of Parts
92 Assembly Instructions / Montageanleitung SIPLACE X-Series S Smart Pin Support 05/2019
Fig.10: Holder for Q10 magazine
Holder for Q10 magazine assembly
[03088072-xx]
Fig.11: Q10 magazine
Q10 magazine for 10 pins
[03087508-xx]
Fig.12: Pin
Pin
[00119995-xx] (package with 5 pins)
Fig.13: Holder
Only for X4i S:
Optional: Holder for row 2 NC and second
W5 magazine
1. Location 1 and 3 [03097749-xx]
2. Location 2 and 4 [03090225-xx]
Fig.14: IC camera adapter
IC camera adaptor assembly SX4a (adapter
for magazine Q10 magazine)
[03099054-xx]
2 Brief Description
2.5 Overview of Parts
Assembly Instructions / Montageanleitung SIPLACE X-Series S Smart Pin Support 05/2019 93
Fig.15: Dummy feeder
Dummy feeder with fiducial, 2 slots
[00519876-xx]
Fig.16: Spacer
Spacer (buffer) for SPS
[03094012-xx]
This spacer is only needed if the pin picker
is fitted towards the gantry root at gantry 1
or 3.
Fig.17: Basic assembly NC row 2
Only for X3 S, X4 S:
Basic assembly NC row 2/W5 magazine (for
NC row 2 and one or two W5 magazines)
[03089888-xx]