00197394-03_AI_Smart-Pin-Support_X-S_DE_EN.pdf - 第95页

2 Brief Description 2.7 Tools and Equipment Required Assembly Instructions / Montageanleitung SIPLACE X-Series S Smart Pin Support 05/2019 95 2.7 Tools and Equipment Required ● Standard tooling ● Torque screwdriver 100-5…

100%1 / 126
2 Brief Description
2.6 Note on the strain reliefs
94 Assembly Instructions / Montageanleitung SIPLACE X-Series S Smart Pin Support 05/2019
2.6 Note on the strain reliefs
NOTICE
Strain reliefs
Older pin picker versions are equipped with insufficiently dimensioned strain reliefs.
► See also the technical information "Smart Pin Support: Replacing Defective Spiral
Cables on the Pin Picker (Update)" [DE: TI2013-09D04] [EN: TI2013-09E04].
Comparison
Fig.18: Comparison of the strain reliefs
1 Pin picker on the SX1/SX2
with new strain reliefs
2 Pin picker on the X-Series
with new strain reliefs
3 Pin picker on the X-Series
S with old strain reliefs
2 Brief Description
2.7 Tools and Equipment Required
Assembly Instructions / Montageanleitung SIPLACE X-Series S Smart Pin Support 05/2019 95
2.7 Tools and Equipment Required
●
Standard tooling
●
Torque screwdriver 100-500 Ncm [03078400-xx]
●
Depth measuring gauge 300mm [03079617-xx] (recommended)
or
Standard measuring gauge (slide gauge)
NOTICE
Q10 magazine
To install the Q10 magazine, you need a depth measuring gauge. A standard measuring
gauge does not cover the required measuring range of over 227 mm.
●
For each pin picker: 5x cable ties W=2.4mm L=92mm TYB-23M "black" [00805140-xx]
●
For each pin picker: 1x mounting base MB1 [00362777-xx]
●
For each pin picker: 1x DIN7991-M3x6-A2 screw [03016240-xx]
●
Loctite 243 [00334892‑xx]
●
Service manual for your machine
●
If necessary: Assembly instructions "Row 2 Nozzle Changer – Nozzle Changer Before
MTC" [DE+EN:00197369‑xx]
●
If required, "Operating and Configuring the Smart Pin Support SX" user guide [00197001-xx].
2.8 Required Working Time
The complete hardware installation takes 3 to 4 hours, depending on the machine type.
Programming work on the SIPLACE Pro computer may also be needed.
2 Brief Description
2.8 Required Working Time
96 Assembly Instructions / Montageanleitung SIPLACE X-Series S Smart Pin Support 05/2019