c900795.R02_EN.pdf - 第11页
9 The lithium battery is used in XIO board. The expected life time is two years (operating at mosphere tem perature 23 ℃ ) . If the battery runs out, the date an d time shown in the monitor will be reset. Please contact …
8
■ Safety Interlock
The machine covers (front/rear) and the optional CE safety guard feature safety interlock mechanism. To
safeguard the operator, this mechanism is activated to stop the machine immediately by opening a machine
cover or entering hand or part of the body inside the CE safety guard during operation.
■ Detailed Condition
The unit has to be used in environment shown as below.
【Environment Conditions 】
・Ambient Temperature (to guarantee accuracy) ＝23±2℃
・Ambient Temperature (to guarantee functions) ＝10～35℃
（Average of Temperature over than 24 hours must be less than 30 degree）
・Percentage Humidity ＝20～90％RH（however, no dew condensation）
・Altitude ＝Less than 1000m (above sea level)
・Atmosphere＝ There is no dust, fog and corrosive gas.
The unit has not been designed to use in housing and commercial area.
The maximum sound noise during production is 70.1dB.
【Warning】
If operators have to use the machine in high acoustic noise (more than 80dB) which might cause
trouble hearing, protector of ears must be worn.
9
The lithium battery is used in XIO board.
The expected life time is two years (operating atmosphere temperature 23℃) .
If the battery runs out, the date and time shown in the monitor will be reset.
Please contact us or our distributor, replacement of the lithium battery will be done by our service
engineer.
If the removed lithium battery is discarded by customer, do not discard it as incombustible.
The electrical terminals of the battery have to be insulated by some tapes and so on, and then
should be discarded or recycled following law, code and regulation of your country.
* The lithium battery might heat, fire or burst if the electrical terminals short.
When the unit is exported to oversea, various kinds of packaging materials are used.
Please dispose or recycle packaging materials following law, code and regulation of your
country.
Components of packaging material are shown in the below table.
Name Use Main Component
Barrier Film Damp-proof
and Antirust
Packaging
Material
Polyethylene Telephthalate（PET）
Polyethylene（PE）
Polyethylene Cloth（PE）
LL Film：Ethylene・1－Butene Copolymer
HIPLE ACE Strengthened
Cardboard
Paper (Cellulose Fiber Aggregation）
Starch
Dick Estelle
Band
Packaging
Material for
Strengthened
Cardboard
Polyethylene Telephthalate（PET）
Pigment・Approx.0.2％
Carbon Black・Approx.0.2％
Dick
PP Band
Light Weight
Packaging
Band
Polypropylene（PP）
Calcium Carbonate・3％
Pigment・Approx.0.2％
Carbon Black・Approx.0.4％
PP Band
Clip
PP Band Clip
Polypropylene（PP）
Sun Dry
(desiccant）
Damp-proof,
Antirust and
Dew
Condensation
Prevention
Calcium Chloride
Non-woven fabric cloth
10
Name Use Main Component
Shock Watch
(Label Type）
Shock
Detecting
Instrument
Paper Label applied acrylic adhesive
Clip：Polystyrene（PS）
Paper Liner
Glass Tube
Tilt Sensor Tilt ( turnover
and drop)
detecting
instrument
Surface File：Polypropylene（PP）and Rubber Pressure
Sensitive Adhesive
Typographical Display：Pigment ＋Plastics
Surface Paper ：Pulp
Base Material：Cellulose
Content of Detection Agent ：Micro Beads Silica Gel
3A
Colorant of Detection Agent ：Food Red (Blue #1）
Rock Pin：Stainless Steel（SUS301）
Surface Tape：Polyester＋Acrylic Adhesive
Stretch File Prevention of
dust and
contamination
Polyethylene（PE）
Bubble Wrap
Polyethylene（PE）
Antitarnish
Paper
Cushioning Craft Paper
Volatile Corrosion Inhibitor
Banding Band To Fix
Movable Parts
Nylon 66（PA66）
■Others
• A variety of information related to our products is published in our home page. Please be
obtained latest information by checking our home page periodically
URL: http://www.yamaha-motor.co.jp
• Content of this manual may be changed without notice.