c900795.R02_EN.pdf - 第47页
3 Mechanical Section 3-9 Insert O-RING LE6-M5FL4-000 / O-RING (VITON) Insert SCREW SHAFT to SCREW POMP and then close the cap to complete this operation. * Pay attention to the position of V CUT on LOWER BERAING and secu…
3 Mechanical Section
3-8
Installing O-RING on SCREW POMP
Install O-RING on SCREW POMP following the below procedure
① Apply SILICON GREASE
O-RING
LE6-M5FL4-000 / O-RING (VITON)
Use an accessory SILICON GREASE
LG0-M89AB-000 / GREASE SILICON
※Do not use an
y
other silicon
g
rease.
Put small amount of grease on a cotton swab
Fingernail-sized amount of grease
※Do not put grease too much
2mm
Apply grease to the screw shaft slimly
※Do not put grease widely.
(About 2mm from the bottom of LOWER BEARING)
3 Mechanical Section
3-9
Insert O-RING
LE6-M5FL4-000 / O-RING (VITON)
Insert SCREW SHAFT to SCREW POMP and then
close the cap to complete this operation.
* Pay attention to the position of V CUT on LOWER
BERAING and secure that SCREW SHFT has been
inserted completely.
3 Mechanical Section
3-10
Assembling STD DP ROTATION NOZ.
The below is an assembly drawing and part list of STD DP ROTATION NOZ.
Part List
No. PART NO. PART NAME Q’TY No. PART NO. PART NAME Q’TY
1 LE6-M5FBV-00x O-RING 1 9 LE7-M5F18-00x COLLAR 1
2 LE7-M5F11-00x HOLDER,NOZZLE 1 10 LE7-M5F19-00x CAP,LOCK 1
3 LE7-M5F12-00x BODY,MAIN 1 11 LE7-M5F1A-00x O-RING 2
4 LE7-M5F13-00x PIPE,FITTING 1 12 LE7-M5F1C-00x O-RING 1
5 LE7-M5F14-00x CAP,LOCK 1 13 LE8-M5F70-xxx TWIN NOZZLE SEL 1
6 LE7-M5F15-00x ADAPTER 1 14 LG0-M71GH-10x SCREW,SET 1
7 LE7-M5F16-00x STOPPER,TWIN 1 15 LG0-M71GK-30x SCREW,SET 1
8 LE7-M5F17-00x PIN,PARALLEL 1