c900795.R02_EN.pdf - 第55页
3 Mechanical Section 3-17 ■ Connecting the tube joint and syringe ■ Connecting to the valve Screw the tube joint in clockwise. Use care to avoid stripping the threads. Insert until a latching sound (click) is heard. Rota…
3 Mechanical Section
3-16
Installing the dispensing head
The procedure for installing the dispense head on the machine is given below.
■ Installing the magnet set for remaining amount detection
■ Installing the syringe holder
Insert the magnet into the plunger.
Rotate to align with the syringe's flange orientation.
3 Mechanical Section
3-17
■ Connecting the tube joint and syringe
■ Connecting to the valve
Screw the tube joint in clockwise.
Use care to avoid stripping the threads.
Insert until a latching
sound (click) is heard.
Rotate the lug in the clockwise direction
to lock it.
3 Mechanical Section
3-18
■ Securing the syringe
While pulling the valve's moving part
forward, press the syringe joint into the
adapter base.
Press in until a latching sound (click) is heard.
Tighten the finger screw to secure the syringe.