c900795.R02_EN.pdf - 第80页
4 Electrical Section 4-6 Serial DO Map Turning on/off in the serial DO Map allow s an actuator to moves. Please be confirmed safety before exciting this function. ■ Device 1 Address Bit No. Signal Name Address Bit No. Si…
4 Electrical Section
4-5
Serial I/O
■ Serial I/O List
Serial DO – Device 1, 3, 7, 9
Serial DI – Device 2, 4, 8, 10
Action:
① Click the cell corresponding to the desired actuator.
② At the same time you click the cell, the display changes 1(On) or 0(Off), and the actuator moves
accordingly.
Example:
■ Moving Up and Down the Board Stopper
① Select Manual> Signal I/O to open [Serial I/O] window.
② Select [Device3] tab.
③ Click [State] of [Board Stopper Up A] cell, Status changes “0” to “1” and the board stopper lifts.
At this time, confirm that State of [Board Stopper Up A (0010h)] in [Device4] switches from “0” to “1”.
④ To move down the board stopper, click [State] of [Board Stopper Up A] in [Device3].
And State changes “1” to “0”. At this time, State of [Board Stopper Up A (0010h)] in [Device4] switches
from “1” to “0”.
Turning on/off signal output in the Signal Output (Control) window allows an actuator to move. When
executing this operation, do not stick head, hands, or other parts of the body inside the unit. Serious injury
can result. Also make sure non-operators are a safe distance from the unit.
Before performing signal output on/off operation, make sure no foreign obstacles are left in the unit or tray
feeder. Otherwise, costly machine damage can occur.
Warning
Caution
4 Electrical Section
4-6
Serial DO Map
Turning on/off in the serial DO Map allows an actuator to moves.
Please be confirmed safety before exciting this function.
■ Device 1
Address
Bit
No.
Signal Name Address
Bit
No.
Signal Name
0000h 0 READY SW (F) 0004h 0
Signal Tower 1 On
1 RESET SW (F) 1
Signal Tower 2 On
2 START SW (F) 2
Signal Tower 3 On
3 STOP SW (F) 3
Signal Tower 4 On
4 CLEAR SW (F) 4
5 5
WARING SOUND
6 6
HAZARD SOUND
7 DOCKING SW (F) (Right Front) 7
UPS Shout down
0001h 0 0005h 0
READY Output
1 1
BOARD AVAILABLE Output
2 2
3 3
4 4
5 5
6 6 Trigger 1 Output Place Bit 0
7 7 Trigger 1 Output Place Bit 1
0002h 0 READY SW (R) 0006h 0
Safety Relay Rest
1 RESET SW (R) 1
Front Cover Lock
2 START SW (R) 2
Rear Cover Lock
3 STOP SW (R) 3
4 CLEAR SW (R) 4
5
5
Internal Illumination ON
6
6
SERVO ON Permission 1
7 DOCKING SW (Left Rear) 7
SERVO ON permission 2
0003h 0 0008h 0
1
1
Feeder Bank Board Power Supply (Left Front) ON
2
2
3 CTF (R)/(Right Rear) Servo Power Supply 3
Feeder Bank Power (Left Front) 5V ON
4 4
5 5 Feeder Bank Power (Left Front) 24V ON
6 6 Feeder Bank Board Power Supply (Left Rear) ON
7 7 Feeder Bank Board Power Supply (R) (Right Rear ON
4 Electrical Section
4-7
Address
Bit
No.
Signal Name Address
Bit
No.
Signal Name
0009h 0
Feeder Bank Power (Left Rear) 5V ON
000Eh 0
Conveyor1 Alarm Reset
1
Feeder Bank Power (Right Rear) 5V ON
1
Conveyor2 Alarm Reset
2
Feeder Bank Power (Left Rear) 24V ON
2
Conveyor3 Alarm Reset
3
Feeder Bank Power Supply ® (Right Rear) 24V ON
3
4
Tape Cutter Open (F)
4
5
AMF Vacuum Stage / Tape Cutter Close (F)
5
Conveyor1 Rotation Direction
6
Tape Cutter Open (R)
6
Conveyor2 Rotation Direction
7
Tape Cutter Close (R)
7
Conveyor3 Rotation Direction
000Ah 0
000Fh 0
1
CFB (Left Front) Unlock
1
2
CFB (Left Rear) Unlock
2
Conveyor1 Rotation
3
3
Conveyor2 Rotation
4
ACTIVE SW (F)
4 Conveyor3 Rotation
5 Dot Station Paper Feed 5
6
ACTIVE SW (R)/CTF(Left Rear)Draw-in Cylinder ON
6
7
7
000Ch 0
0010h 0 Conveyor1 Speed Data Bit0
1
Board Stopper
1 Conveyor1 Speed Data Bit1
2
Conveyor Sensor POWER 2
2 Conveyor1 Speed Data Bit2
3
Board Stopper 2
3 Conveyor1 Speed Data Bit3
4
Push-up Plate ON
4 Conveyor1 Speed Data Bit4
5
Quick Clamp UP
5 Conveyor1 Speed Data Bit5
6
6 Conveyor1 Speed Data Bit6
7
7 Conveyor1 Speed Data Bit7
000Dh 0
ANC A Open
0011h 0 Conveyor2 Speed Data Bit0
1
Conveyor1 Sensor POWER
1 Conveyor2 Speed Data Bit1
2
2 Conveyor2 Speed Data Bit2
3 START SW (U-turn Conveyor) 3 Conveyor2 Speed Data Bit3
4 PCB Vacuum 4 Conveyor2 Speed Data Bit4
5 PCB Vacuum Break 5 Conveyor2 Speed Data Bit5
6
6 Conveyor2 Speed Data Bit6
7
7 Conveyor2 Speed Data Bit7