c900795.R02_EN.pdf - 第76页

4 Electrical Section 4-2 Signal I/O Signal I/O is t he abbreviation of signal input /output. The signal input refers to the input signal via t he sensors. The signal ou tput refers to the command transmitted to the actua…

4 Electrical Section

4-1

Electrical Section

4 Electrical Section

4-2

Signal I/O

Signal I/O is the abbreviation of signal input/output. The signal input refers to the input signal via the

sensors. The signal output refers to the command transmitted to the actuators.

Signal Output (Control) window serves as controls to move actuators for checking their movements. In

response to their movements, Signal Input (Monitor) window shows On/Off of motors and actuators.

Signal Input Monitor

You can check On/Off of the sensors real-time. “1” indicates on, “0” off. When a sensor of a switch, motor,

and actuator responds, the change of the sensor status is shown real-time. Wire disconnection or sensor

failure can also be detected.

Menu: Manual>Signal I/O>Signal Input (Monitor)

Signal Input (List) ・・・Not Use

Signal Input (Details)・・・Not Use

FIO ･・・・・・・・・・ Not Use

4 Electrical Section

4-3

■ Motor tab

■ Motor Sensor tab

Window:

ALM: Alarm

MEL: Minus End Limited

PEL: Plus End Limited

MARK: Mark

INP: In Position

MSLD: Minus Slow Down

PSLD: Plus Slow Down

EZ: 0 Phase

ORG: Origin