c900795.R02_EN.pdf - 第19页

1 Installation 1-5 Installing Unit Do not touch term inals of electric com ponents when the power is on to prevent elect ric shock and unit damage. Make sure to ground the unit to prevent el ectric shock. Note on Install…

1 Installation

1-4

Production Line

To align your assembly line, first install the heaviest unit. Then install peripheral units using the first unit as

a reference.

Reference

Loader D10 Unit Reflow Oven Conveyor Unloader

To transfer the PCB (printed circuit board) smoothly, clearance between units are quite important. Be sure

that the clearance between units is 5 mm or less as below figure shows. Adjust the height of the downstream

unit a little lower (0-0.5 mm) so that the PCB is transferred smoothly.

0 - 0.5mm

5mm or less

Downstream Upstream

側

1 Installation

1-5

Installing Unit

Do not touch terminals of electric components when the power is on to prevent electric shock and unit

damage.

Make sure to ground the unit to prevent electric shock.

Note on Installation

It is normal that the adjust foot can be slightly inclined (within 2-degree range).

Do not tighten the bolt forcedly trying to fix the foot.

When you move and/or install the unit, be careful not to apply excessive force

on the adjust foot. This may cause the screw of the adjust foot to break.

When placing the unit on the floor, be sure that the unit is kept horizontal.

Warning

2°

If excessive force is

applied, the screw may

break at this point.

Mounting Screw

Nut

Adjust foot

1 Installation

1-6

ACTION:

① Locate the unit to the specified place.

② Remove the followings: the bolt that locks the head in the X-axis beam and the metal fitting that

prevent X-axis beam movement to the Y direction. After removed the bolts and fittings, confirm that

the head can move to the X direction and the X-axis beam can move to the Y direction manually.

Note; Please keep the bolts and metal fittings, they will be necessary if moving the machine.

X Axis Fixing Bracket

Fixing Screw

Head Fixing Bracket

Y Axis Fixing Bracket

(two brackets at both sides)

Fixing Screws