c900795.R02_EN.pdf - 第49页
3 Mechanical Section 3-11 This is the procedu re to install O-RING on Rotatin g Dispense Nozzle, Please carry ou t installation following the below procedure. Set O-RING on COLLAR ＊ Recomme nd replacing O-RING once a mon…
3 Mechanical Section
3-10
Assembling STD DP ROTATION NOZ.
The below is an assembly drawing and part list of STD DP ROTATION NOZ.
Part List
No. PART NO. PART NAME Q’TY No. PART NO. PART NAME Q’TY
1 LE6-M5FBV-00x O-RING 1 9 LE7-M5F18-00x COLLAR 1
2 LE7-M5F11-00x HOLDER,NOZZLE 1 10 LE7-M5F19-00x CAP,LOCK 1
3 LE7-M5F12-00x BODY,MAIN 1 11 LE7-M5F1A-00x O-RING 2
4 LE7-M5F13-00x PIPE,FITTING 1 12 LE7-M5F1C-00x O-RING 1
5 LE7-M5F14-00x CAP,LOCK 1 13 LE8-M5F70-xxx TWIN NOZZLE SEL 1
6 LE7-M5F15-00x ADAPTER 1 14 LG0-M71GH-10x SCREW,SET 1
7 LE7-M5F16-00x STOPPER,TWIN 1 15 LG0-M71GK-30x SCREW,SET 1
8 LE7-M5F17-00x PIN,PARALLEL 1
3 Mechanical Section
3-11
This is the procedure to install O-RING on Rotating Dispense Nozzle, Please carry out installation
following the below procedure.
Set O-RING on COLLAR
＊Recommend replacing O-RING once a month
COLLR (LE7-M5F10-00x)
O-RING(LE7-M5F1A-00x)
Set O-RING on COLLAR (opposite side)
＊Recommend replacing O-RING once a month
COLLR (LE7-M5F10-00x)
O-RING(LE7-M5F1A-00x)
Set COLLAR on BODY,MAIN
Apply silicon grease to inner side of O-RING by
a cotton swab
BODY,MAIN (LE7-M5F12-00x)
SILICON GREASE (LG1-M89AB-00x)
Set COLLAR on BODY,MAIN
Adjust the positioning slit to the positioning pin
１
2
3
4
3 Mechanical Section
3-12
Put CAP, LOCK on BODY, MAIN
BODY, MAIN (LE7-M5F12-00x)
CAP,LOCK (LE7-M5F14-00x)
Assemble a nozzle to HOLDER, NOZZLE
HOLDER, NOZZLE (LE7-M5F11-00x)
O-RING (LE7-M5F1C-00x)
ADAPTER (LE7-M5F15-00x)
TWIN NOZZLE SEL(LE8-M5F70-xxx)
STOPPER,TWIN (LE7-M5F16-00x)
Insert NOZZLE on ADAPTOR.
Set ADAPTER and NOZZLE to HOLDER,
NOZZLE and then rotate STOPPER, TWIN to
complete assembly.
5
6
7