4OM-1431-006_w.pdf - 第113页

1-54 0709-001 (9) Puttheatringreplacementjigontherollerontheoscillating side (outside of the machine). Pushonlytheatringdownwardbyhand andinsertitintothe groove of the roller . Flat Ring Fig. …

1-53

4.4 Procedure of Flat Ring Replacement

(6) Usetheinnerholesofthecutunitxingjigwiththetapeclamp

being closed and attach the jig with the bent portion being

directed upward.

Fig. 4A52

WARNING

Pay close attention to the cutter blade during the maintenance

work.

•

Lack of attention will result in a hand injury, etc.

Wear gloves and take the greatest care in performing the work.

•

Besuretoattachthexingjigtothecutunitduringthe

maintenance work for safety purposes.

(7) Cuttheusedatringwitha

cutteronmarketanddetachit.

(8) Attachtheatringtotheatringreplacementjig.

Fig. 4A53

0802-002

1-54

0709-001

(9) Puttheatringreplacementjigontherollerontheoscillating

side (outside of the machine).

Pushonlytheatringdownwardbyhand

andinsertitintothe

groove of the roller.

Flat Ring

Fig. 4A54

(10)Payattentiontothecutterbladeanddetachtheatring

replacement jig.

(11) Attach the tape guide and the transparent cover.

4.4 Procedure of Flat Ring Replacement

1-55

4.5 Lubricating Procedure onto the Linear Guide Oil Filler

Port

Lubricating Timing: Every three months

Preparation for lubrication

Hand Grease Gun

KH-120 (Maker : Yamada Yuki)

Type N

(Maker : THK)

(Part No. : 630 061 7467)

DAPHNE EPONEX GREASE No.1

4.5 Lubricating Procedure onto the Linear Guide Oil Filler Port

0709-001