4OM-1431-006_w.pdf - 第182页
3-25 3.3 Conveyor 0802-002 Erroe ID Error Name, Description, Cause, and Remedy 426104 Input Conveyor Error DI was detected. ----- 426105 Input Conveyor Error The input conveyor upper cover opened during product operation…
3-24
3.3 Conveyor
0802-002
Erroe ID Error Name, Description, Cause, and Remedy
425310 Output Cnvr. Error
The error was detected while the reversal positioning was operating.
Please continue the work after checking the P.C.B on a conveyor.
425311 Output Cnvr. Error
Conveyor width The conveyor upper cover by output side opened during axial
operation.
Please close a cover and perform again.
425312 Output Cnvr. Error
The conveyor upper cover by output side opened during production operation and
equipment operation.
Please close a cover and perform again.
425313 Output Cnvr. Error
The Output conveyor upper cover opened during production operation and
equipment operation.
Please close a cover and perform again.
425314 Output Cnvr. Error
It changed into the conveyor operation forbidden state during axial operation of
conveyor width. (The conveyor operation forbidden signal from output conveyor
was detected.)
Please cancel the forbidden operation state of a conveyor and perform again.
425315 Output Cnvr. Error
The P.C.B was transported a predetermined distance, but the operation was not
completed.
There is a possibility that the P.C.B fell over from conveyer whether a board is
caught.
Pleaseconrmitoveraconveyer.
425316 Output Cnvr
. Error
Abnormality occurred at the time of disposal of Board END signals.
Please start production again.
425317 Output Cnvr. Error
The process of inside signal between conveyors failed.
Please continue the work after checking the P.C.B on a conveyor.
425318 Output Cnvr. Error
Speed reduction was not performed during transferring operation.
Please return the P.C.B. to the proper position when it is sitting between the
conveyors otherwise, remove the P.C.B. And, the P.C.B. detection sensor might
have had a wrong detection, so please check it to make detections correctly.
426101 Input Conveyor Error
The initialization is imperfect.
-----
426102 Input Conveyor Error
An error occurred during zeroing operation.
Try to operate the zero return again.
426103 Input Conveyor Error
An alarm for interference is occurring.
-----
3-25
3.3 Conveyor
0802-002
Erroe ID Error Name, Description, Cause, and Remedy
426104 Input Conveyor Error
DI was detected.
-----
426105 Input Conveyor Error
The input conveyor upper cover opened during product operation or the machine
running.
-----
426106 Input Conveyor Error
Brownout on the power source was detected.
Conrmthetransferdriver.
426107 Input Conveyor Error
OT(+) was detected during product operation or the machine running.
Operate the zero return for the conveyor.
426108 Input Conveyor Error
OT(-) was detected during product operation or the machine running.
Operate the zero return for the conveyor.
426201 Output Conveyor Error
The initialization is imperfect.
-----
426202 Output Conveyor Error
An error occurred during zeroing operation.
Try to operate the zero return again.
426203
Output Conveyor Error
An alarm for interference is occurring.
-----
426204 Output Conveyor Error
DI was detected.
-----
426205 Output Conveyor Error
The input conveyor upper cover opened during product operation or the machine
running.
-----
426206 Output Conveyor Error
Brownout on the power source was detected.
Conrm
thetransferdriver.
426207 Output Conveyor Error
OT(+) was detected during product operation or the machine running.
Operate the zero return for the conveyor.
426208 Output Conveyor Error
OT(-) was detected during product operation or the machine running.
Operate the zero return for the conveyor.
3-26
3.3 Conveyor
0709-001
Erroe ID Error Name, Description, Cause, and Remedy
426301 Trapped P.C.B. Detection
There is a P.C.B. between conveyors of the Input and the Positioning.
Remove the P.C.B. on the conveyor.
426302 Trapped P.C.B. Detection
There is a P.C.B. between conveyors of the Positioning and the Output.
Remove the P.C.B. on the conveyor.
426303 Trapped P.C.B. Detection
There is a P.C.B. between conveyors of the input machine and the supply
conveyor.
Remove the P.C.B. on the conveyor.
426304 Trapped P.C.B. Detection
There is a P.C.B. between conveyors of the output and the output machine.
Remove the P.C.B. on the conveyor.