4OM-1431-006_w.pdf - 第135页
2-4 0709-001 2.2 List of W arning Messages 2.2 List of W arning Messages T able 4B1 W arning Codes Display Field A (Scope of W arning Messages) Display Field B (Details of W arning Messages) 010101 Emergency Stop Press […
2-30709-001
•
Reset Procedure from "WARNING" Window
(1) Take a note of the startup guidance.
Notice
If you forget the contents of the startup guidance, the machine
cannot be reset correctly to its normal condition.
(2) Press the [OK] button. The original window resumes.
(3) Follow the instructions (details of countermeasures) to reset the
machine to its normal condition.
2.1 "WARNING" (Startup Guidance) Window
2-40709-001
2.2 List of Warning Messages
2.2 List of Warning Messages
Table 4B1
Warning Codes Display Field A (Scope of Warning Messages)
Display Field B (Details of Warning Messages)
010101 Emergency Stop
Press [POWER ON] button to activate Load Power circuit.
010102 Emergency Stop
Press [POWER ON] button to activate Load Power circuit.
010201 Air Pressure Drop
Increase air pressure and press the [POWER ON] button to turn on the
machine.[K6]
010202 Air Pressure Drop
Increase air pressure and press the [POWER ON] button to turn on the
machine.[K6]
010301 Safety cover
Please close and lock the safety cover.
010401 Safetycoverlockconrm
Please close and lock the safety cover.
010501 Beam XY main loop OFF
Press [POWER ON] button to activate Load Power circuit.
010502 Beam XY main loop OFF
Press [POWER ON] button to activate Load Power circuit.
010601 Head main Loop OFF
Press [POWER ON] button to activate Load Power circuit.
010602 Head main Loop OFF
Press [POWER ON] button to activate Load Power circuit.
010701 Stage is not ready
Please close and lock the safety cover
.
010801 Feeder base is not connected.(rear)
Please connect the feeder base connector.[B0916]
010901 Feeder base is not connected.(front)
Please connect the feeder base connector.[B0916]
010a01 Vacuum pump
Please turn on the vacuum pump.
010b01 Feeder is not ready (rear)
Please turn on the Feeder Ready SW (rear).
010c01 Feeder is not ready (front)
Please turn on the Feeder Ready SW (front).
010d01 Pattern program is not set
Please set the patterm program
010e01 Auto
setupnotnish
Please remove the P.C.B. on equipment and execute the automatic arrangement.
2-50709-001
2.2 List of Warning Messages
Warning Codes Display Field A (Scope of Warning Messages)
Display Field B (Details of Warning Messages)
010f01 P.C.B. existence
Please remove the P.C.B. on the conveyor.
010f02 P.C.B. existence
Please remove the P.C.B. on the NL conveyor.
010f03 P.C.B. existence
Please remove the P.C.B. on the NA conveyor.
010f04 P.C.B. existence
Please remove the P.C.B. on the NB conveyor.
010f07 P.C.B. existence
There is no P.C.B. on the NL conveyor.
010f08 P.C.B. existence
There is no P.C.B. on the NA conveyor.
010f0b P.C.B. existence
There is no P.C.B. on the NR conveyor.
010f10 P.C.B. existence
Please remove the P.C.B of stage 1.
010f12 P.C.B. existence
The P.C.B is taken into the positioned place of stage 1.
010f14 P.C.B. existence
Please remove the P.C.B of the inlet of input buffer cnvr.
010f15 P.C.B. existence
Please remove the P.C.B of the positioning 1conveyor.
010f18 P.C.B. existence
Please remove the P.C.B of inlet and outlet of output cnvr.
010f19 P.C.B. existence
There is no P.C.B on the inlet of input buffer conveyer.
010f20 P.C.B. existence
There is no P.C.B on the positioning 1conveyor.
010f23 P.C.B. existence
There is no P.C.B on the inlet and outlet of output cnvr.
010f24 P.C.B. existence
There is no P.C.B that can be transported.
010f25 P.C.B. existence
Two P.C.Bs were detected on the supply conveyor. Please remove the P.C.B of the
conveyor entrance.
010f26 P.C.B. existence
Two P.C.Bs were detected on the output conveyor. Please remove the P.C.B on the
conveyor.
010f27 P.C.B. existence
The P.C.B was detected on the inlet of input buffer. Please remove the P.C.B.
010f28 P.C.B. existence
The P.C.B was detected on the positioning 1conveyor. Please remove the P.C.B.