4OM-1431-006_w.pdf - 第196页
3-39 3.7 Automatic Setup 0802-002 Erroe ID Error Name, Description, Cause, and Remedy 496407 Conveyor Width Automatic Setup (Input conveyor W2) OT (+) was detected during auto operation. Perform zeroing operation. 496408…
3-380802-002
3.7 Automatic Setup
Erroe ID Error Name, Description, Cause, and Remedy
496208 Conveyor Width Automatic Setup (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496301 Conveyor Width Automatic Setup (Input conveyor W2)
The initialization is imperfect.
(1) Power on the machine again. (2) The transfer driver has a problem.
496302 Conveyor Width Automatic Setup (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496303 Conveyor Width Automatic Setup (Input conveyor W2)
An alarm for the interference is occurring.
-----
496304 Conveyor Width Automatic Setup (Input conveyor W2)
DI was detected.
-----
496305 Conveyor Width Automatic Setup (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
496306 Conveyor Width Automatic Setup (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
496307 Conveyor Width Automatic Setup (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496308 Conveyor Width Automatic Setup (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496401 Conveyor Width Automatic Setup (Input conveyor W2)
The initialization is imperfect.
(1) Power on the machine again. (2) The transfer driver has a problem.
496402 Conveyor Width Automatic Setup (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496403 Conveyor Width Automatic Setup (Input conveyor W2)
An alarm for the interference is occurring.
-----
496404 Conveyor Width Automatic Setup (Input conveyor W2)
DI was detected.
-----
496405 Conveyor Width Automatic Setup (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
496406 Conveyor Width Automatic Setup (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
3-39
3.7 Automatic Setup
0802-002
Erroe ID Error Name, Description, Cause, and Remedy
496407 Conveyor Width Automatic Setup (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496408 Conveyor Width Automatic Setup (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496501 Conveyor Width Automatic Setup (Input conveyor W2)
The initialization is imperfect.
(1) Power on the machine again. (2) The transfer driver has a problem.
496502 Conveyor Width Automatic Setup (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496503 Conveyor Width Automatic Setup (Input conveyor W2)
An alarm for the interference is occurring.
-----
496504 Conveyor Width Automatic Setup (Input conveyor W2)
DI was detected.
-----
496505 Conveyor Width Automatic Setup (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
496506 Conveyor Width Automatic Setup (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
496507 Conveyor Width Automatic Setup (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496508 Conveyor Width Automatic Setup (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496601 Conveyor Width Automatic Setup (Input conveyor W2)
The initialization is imperfect.
(1) Power on the machine again. (2) The transfer driver has a problem.
496602 Conveyor Width Automatic Setup (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496603 Conveyor Width Automatic Setup (Input conveyor W2)
An alarm for the interference is occurring.
-----
496604 Conveyor Width Automatic Setup (Input conveyor W2)
DI was detected.
-----
496605 Conveyor Width Automatic Setup (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
3-40
3.7 Automatic Setup
0802-002
Erroe ID Error Name, Description, Cause, and Remedy
496606 Conveyor Width Automatic Setup (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
496607 Conveyor Width Automatic Setup (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496608 Conveyor Width Automatic Setup (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496717 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496718 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496727 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496728 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496737 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496738 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496747 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496748 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496757 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
496758 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
496767 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (+) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
496768 Conveyor Width Automatic Setup (Input conveyor W2)
An overrun sensor (-) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.