4OM-1431-006_w.pdf - 第162页

3-5 0709-001 3. Error IDs and Remedial Procedures Erroe ID Error Name, Description, Cause, and Remedy 40040c Interlock Error The feeder opening sensor (rear) was shaded. [B0512] Please remove the factor which is shading …

100%1 / 271
3-40709-001
3. Error IDs and Remedial Procedures
Erroe ID Error Name, Description, Cause, and Remedy
400302 B Beam Power Shutoff
-----
400303 B Beam Power Shutoff
-----
400401 Interlock Error
The[emergencystop]switchwaspressed.(Pleaseconrm
thenozzlehasnot
fallen when you push the beam by the hand.)
Please switch on a power supply after canceling an emergency stop switch and
screen return to normal display.
400402 Interlock Error
The safety cover opened. [K4]
Please shut a safety cover and push the [POWER ON] button.
400403 Interlock Error
Safety cover (CV) detected
-----
400404 Interlock Error
The main circuit of the XY Beam (Rear) was broken. [K33]
-----
400405 Interlock Error
The main circuit of the XY Beam (Front) was broken. [K34]
-----
400406 Interlock Error
Head (Rear) nozzle descent was detected. [A-B3101]
Please perform a zeroing.
400407 Interlock Error
Head (Front) nozzle descent was detected. [B-B3101]
Please perform a zeroing.
400408 Interlock Error
Disengaged Latch(Rear) was detected.
-----
400409 Interlock Error
Disengaged Latch(Front) was detected.
-----
40040a Interlock Error
A wrong setting of the suppressor and a pickup-failed component (Rear) were
detected. [DA-B0510]
Open the safety cover to check the suppressor and remove the failed component
in the pickup operation after that, execute the Warm start.
40040b Interlock Error
A wrong setting of the suppressor and a pickup-failed component (Front) were
detected. [DB-B0510]
Open the safety cover to check the suppressor and remove the failed component
in the pickup operation after that, execute the Warm start.
3-50709-001
3. Error IDs and Remedial Procedures
Erroe ID Error Name, Description, Cause, and Remedy
40040c Interlock Error
The feeder opening sensor (rear) was shaded. [B0512]
Please remove the factor which is shading the feeder opening sensor (rear), and
carry out zero return. (Continue with the warm start)
40040d Interlock Error
The feeder opening sensor (front) was shaded. [B0513]
Please remove the factor which is shading the feeder opening sensor (front), and
carry out zero return. (Continue with the warm start)
40040e Interlock Error
CB Alarm XY(Rear) Detected[Q201,Q221,Q222,Q223]
-----
40040f Interlock Error
CB Alarm XY(Front) Detected[Q201,Q221,Q222,Q223]
-----
400410 Interlock Error
CB Error (Conveyor/Cutter) Detected[Q203]
-----
400411 Interlock Error
CB Alarm(CPU2) Detected[Q214]
-----
400412 Interlock Error
CB Alarm(DC24) Detected[Q206]
-----
400413 Interlock Error
Lowered air pressure was detected. [K6]
-----
400414 Interlock Error
CB Alarm(Vacuum Pump)[Q205]
-----
400415 Interlock Error
The urgent stop reserve input was input.
Turn off the machine by pressing the emergency stop and after restarting it,
perform the zeroing operation.
400416 Interlock Error
NL
axis(Front)InterlockDetected.Pleaseconrmthenozzle
hasnotfallenwhen
you push the beam by the hand.
Please perform a zeroing.
400417 Interlock Error
NLaxis(Rear)InterlockDetected.Pleaseconrmthenozzle
hasnotfallenwhen
you push the beam by the hand.
Please perform a zeroing.
400418 Interlock Error
L1axis(Front)InterlockDetected.Pleaseconrmthenozzle
hasnotfallenwhen
you push the beam by the hand.
ConrmofPathline/Headexcesspushingdetection.
3-60802-002
3. Error IDs and Remedial Procedures
Erroe ID Error Name, Description, Cause, and Remedy
400419 Interlock Error
L2axis(Front)InterlockDetected.Pleaseconrmthenozzle
hasnotfallenwhen
you push the beam by the hand.
ConrmofPathline/Headexcesspushingdetection.
400420 Interlock Error
L3 axis(Front) Interlock Detected
ConrmofPathline/Headexcesspushingdetection.
400421 Interlock Error
L1
axis(Rear)InterlockDetected.Pleaseconrmthenozzle
hasnotfallenwhen
you push the beam by the hand.
ConrmofPathline/Headexcesspushingdetection.
400422 Interlock Error
L2axis(Rear)InterlockDetected.Pleaseconrmthenozzle
hasnotfallenwhen
you push the beam by the hand.
ConrmofPathline/Headexcesspushingdetection.
400423 Interlock Error
L3axis(Rear)InterlockDetected.Pleaseconrmthenozzle
hasnotfallenwhen
you push the beam by the hand.
ConrmofPathline/Headexcesspushingdetection.
400424 Interlock Error
The vacuum sensor's OFF of a P.C.B vacuum support Jig was detected during
P.C.B positioning.
PleaseconrmtheP.C.B.
400425 Interlock Error
An emergency stop switch is pushed.
Please switch on a power supply after canceling an emergency stop switch and
screen return to normal display.
400426 Interlock Error
NL- L conveyor cover open was detected in the main machine.
Close the NL-L conveyor cover in the main machine and lock it.
400427 Interlock Error
NR- L conveyor cover open was detected in the main machine.
Close the NR-L
conveyor cover in the main machine and lock it.
400429 Interlock Error
The secondary air pressure deterioration was detected.
Close the safety cover and lock it.
400428 Interlock Error
The safety cover lock was released.
Close the safety cover and lock it.
400430 Interlock Error
A pickup-failed component (Rear) were detected. [DA-B0510]
Open the safety cover and remove the failed component in the pickup operation
after that, execute the Warm start.