4OM-1431-006_w.pdf - 第170页
3-13 0709-001 3.3 Conveyor 3.3 Conveyor T able 4C5 Erroe ID Error Name, Description, Cause, and Remedy 420701 P .C.B Stopper It is set as "Use" of a positioning stopper in the system data, and the stopper canno…
3-120709-001
3.2 Data
Erroe ID Error Name, Description, Cause, and Remedy
410306 Pattern Program Error
The error is found in the nozzle candidate number of the conversion pattern
program.
-----
410307 Pattern Program Error
The error is found in the adsorption lane number of the conversion pattern
program.
-----
410308 Pattern Program Error
The error is found in the alternation lane number of the comp arrangement data of
the conversion pattern program.
-----
410309 Pattern Program Error
The conversion of the pattern program did not end in prescribed time.
-----
410401 Component Library Data Error
The part library data used by the converted pattern program doesn't exist.
-----
410402 Component Library Data Error
The use nozzle candidate was not able to exchange nozzles because of the skip
specication.
-----
410501 Nozzle Data Error
The error is found in the head nozzle data of the device system data.
-----
410502 Nozzle Data Error
The error is found in the stocker nozzle data of the device system data.
-----
410601 Data Error
-----
410602 Data Error
Error is found in the AUTO OPN MODE beginning mode setting data.
-----
410701 Program Error
It was a error setting of the sequence data was found.
-----
410702 Program Error
It was a error setting of the polling task was found.
-----
3-130709-001
3.3 Conveyor
3.3 Conveyor
Table 4C5
Erroe ID Error Name, Description, Cause, and Remedy
420701 P.C.B Stopper
It is set as "Use" of a positioning stopper in the system data, and the stopper
cannotbeconrmedonadevice.
Pleaseconrmthat
astopperworksaccurately.
420702 P.C.B Stopper
It is set as "Use" of a reversal positioning stopper in the system data, and the
stoppercannotbeconrmedonadevice.
Pleaseconrm
thatastopperworksaccurately.
420801 Manual transfer error
When operation started, error was detected.
-----
420802 Manual transfer error
Error was detected while operating.
-----
420803 Manual transfer error
Operation did not end in prescribed time.
-----
420901 Transfer Error (Others)
Please check the PCB on each conveyer.
-----
420902 Transfer Error (Others)
An error for timeout occurred in communication process during transfer process
startup.
Restart the operation.
420a01 Chute Clamp
It failed to release the chute clamp before NB-W axis operation. (Stage1)
Perform
theoperationagain.Ifthefailureoccurs
repeatedly,pleaseconrmthe
chute clamp pressure sensor.
420a03 Chute Clamp
It failed to release the chute clamp before NB-W axis operation.
Performtheoperationagain.Ifthefailureoccurs
repeatedly,pleaseconrmthe
chute clamp pressure sensor.
3-140709-001
3.3 Conveyor
Erroe ID Error Name, Description, Cause, and Remedy
421101 Input Buffer Cnvr. Overtime
P.C.B. from inp. Machine was not received.
Please continue the work after checking the P.C.B on a conveyor.
421102 Input Buffer Cnvr. Overtime
The P.C.B. transport (exhaust) to Cnvr. Positioning1 did not end in prescribed
time.
Please continue the work after checking the P.C.B on a conveyor.
421103 Input Buffer Cnvr. Overtime
The movement to P.C.B. receiving position did not end in prescribed time.
-----
421104 Input Buffer Cnvr. Overtime
The movement to the arrangement position did not end in prescribed time.
-----
421105 Input Buffer Cnvr. Overtime
The reversal positioning operation did not end in prescribed time.
Please continue the work after checking the P.C.B on a conveyor.
421106 Input Buffer Cnvr. Overtime
The conveyor upper cover by input side has opened.
Please close the cover. Production can be continued.
421201 Input Buffer Cnvr. P.C.B. Detection
P.C.B.'s were at inlet and outlet of cnvr.
-----
421202 Input Buffer Cnvr. P.C.B. Detection
There is no P.C.B. on the conveyer. The P.C.B. fell while moving to the
arrangement position.
Please continue production after checking whether the P.C.B has fallen around a
conveyor.
421203 Input Buffer Cnvr. P.C.B. Detection
There is a P.C.B. on the conveyer. The substrate was not able to be exhausted.
Please continue the work after checking the P.C.B on a conveyor.
421204 Input Buffer Cnvr. P.C.B. Detection
There is no P.C.B on the conveyer. After the P.C.B. carrying in ended, it can not
able to be detected.
Please continue the work after checking the P.C.B on a conveyor.
421205 Input Buffer Cnvr. P.C.B. Detection
Positioning change operation when beginning to be operated, the P.C.B was
detected with the entrance sensor.
Please remove the P.C.B of a conveyor entrance.
421206 Input Buffer Cnvr. P.C.B. Detection
The P.C.B was detected by the entrance sensor with the P.C.B was not able to be
transferred.
Please remove the P.C.B of a conveyor entrance.
421207 Input Buffer Cnvr. P.C.B. Detection
The P.C.B was detected with the conveyer exit sensor.
Please continue the work after checking the P.C.B on a conveyor.