4OM-1431-006_w.pdf - 第114页

1-55 4.5 Lubricating Procedure onto the Linear Guide Oil Filler Port · Lubricating T iming: Every three months · Preparation for lubrication · Hand Grease Gun KH-120 (Maker : Y amada Y uki) · T ype N (Maker : THK) (Part …

1-54

0709-001

(9) Puttheatringreplacementjigontherollerontheoscillating

side (outside of the machine).

Pushonlytheatringdownwardbyhand

andinsertitintothe

groove of the roller.

Flat Ring

Fig. 4A54

(10)Payattentiontothecutterbladeanddetachtheatring

replacement jig.

(11) Attach the tape guide and the transparent cover.

4.4 Procedure of Flat Ring Replacement

1-55

4.5 Lubricating Procedure onto the Linear Guide Oil Filler

Port

Lubricating Timing: Every three months

Preparation for lubrication

Hand Grease Gun

KH-120 (Maker : Yamada Yuki)

Type N

(Maker : THK)

(Part No. : 630 061 7467)

DAPHNE EPONEX GREASE No.1

4.5 Lubricating Procedure onto the Linear Guide Oil Filler Port

0709-001

1-56

Lubricating Procedure

(1) Detach the

upper cover.

(2) Detach the lower cover.

(3) Remove four screws and detach the tape guide.

Oil Filler Port

(Two locations per cutter unit)

Tape Guid

Upper Cover

Lower Cover

Screws

Fig. 4A54-1

4.5 Lubricating Procedure onto the Linear Guide Oil Filler Port

0811-002