4OM-1431-006_w.pdf - 第136页

2-5 0709-001 2.2 List of W arning Messages W arning Codes Display Field A (Scope of W arning Messages) Display Field B (Details of W arning Messages) 010f01 P .C.B. existence Please remove the P .C.B. on the conveyor . 0…

2-40709-001

2.2 List of Warning Messages

Table 4B1

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

010101 Emergency Stop

Press [POWER ON] button to activate Load Power circuit.

010102 Emergency Stop

Press [POWER ON] button to activate Load Power circuit.

010201 Air Pressure Drop

Increase air pressure and press the [POWER ON] button to turn on the

machine.[K6]

010202 Air Pressure Drop

Increase air pressure and press the [POWER ON] button to turn on the

machine.[K6]

010301 Safety cover

Please close and lock the safety cover.

010401 Safetycoverlockconrm

Please close and lock the safety cover.

010501 Beam XY main loop OFF

Press [POWER ON] button to activate Load Power circuit.

010502 Beam XY main loop OFF

Press [POWER ON] button to activate Load Power circuit.

010601 Head main Loop OFF

Press [POWER ON] button to activate Load Power circuit.

010602 Head main Loop OFF

Press [POWER ON] button to activate Load Power circuit.

010701 Stage is not ready

Please close and lock the safety cover

010801 Feeder base is not connected.(rear)

Please connect the feeder base connector.[B0916]

010901 Feeder base is not connected.(front)

Please connect the feeder base connector.[B0916]

010a01 Vacuum pump

Please turn on the vacuum pump.

010b01 Feeder is not ready (rear)

Please turn on the Feeder Ready SW (rear).

010c01 Feeder is not ready (front)

Please turn on the Feeder Ready SW (front).

010d01 Pattern program is not set

Please set the patterm program

010e01 Auto

setupnotnish

Please remove the P.C.B. on equipment and execute the automatic arrangement.

2-50709-001

2.2 List of Warning Messages

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

010f01 P.C.B. existence

Please remove the P.C.B. on the conveyor.

010f02 P.C.B. existence

Please remove the P.C.B. on the NL conveyor.

010f03 P.C.B. existence

Please remove the P.C.B. on the NA conveyor.

010f04 P.C.B. existence

Please remove the P.C.B. on the NB conveyor.

010f07 P.C.B. existence

There is no P.C.B. on the NL conveyor.

010f08 P.C.B. existence

There is no P.C.B. on the NA conveyor.

010f0b P.C.B. existence

There is no P.C.B. on the NR conveyor.

010f10 P.C.B. existence

Please remove the P.C.B of stage 1.

010f12 P.C.B. existence

The P.C.B is taken into the positioned place of stage 1.

010f14 P.C.B. existence

Please remove the P.C.B of the inlet of input buffer cnvr.

010f15 P.C.B. existence

Please remove the P.C.B of the positioning 1conveyor.

010f18 P.C.B. existence

Please remove the P.C.B of inlet and outlet of output cnvr.

010f19 P.C.B. existence

There is no P.C.B on the inlet of input buffer conveyer.

010f20 P.C.B. existence

There is no P.C.B on the positioning 1conveyor.

010f23 P.C.B. existence

There is no P.C.B on the inlet and outlet of output cnvr.

010f24 P.C.B. existence

There is no P.C.B that can be transported.

010f25 P.C.B. existence

Two P.C.Bs were detected on the supply conveyor. Please remove the P.C.B of the

conveyor entrance.

010f26 P.C.B. existence

Two P.C.Bs were detected on the output conveyor. Please remove the P.C.B on the

conveyor.

010f27 P.C.B. existence

The P.C.B was detected on the inlet of input buffer. Please remove the P.C.B.

010f28 P.C.B. existence

The P.C.B was detected on the positioning 1conveyor. Please remove the P.C.B.

2-60709-001

2.2 List of Warning Messages

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

010f31 P.C.B. existence

The P.C.B was detected on the output conveyor Please remove the P.C.B.

010f32 P.C.B. existence

TherearenoP.C.Btonishat

thesametime.PleaseremoveallP.C.Bina

positioning position whether you install a there.

010f33 P.C.B. existence

AP.C.Btonishatthesametime

isnotpreparedonpositioning1conveyer.Please

remove all P.C.B whether to be put.

010f36 P.C.B. existence

A P.C.B was detected at the inlet of the input buffer conveyor. Please remove it.

010f37 P.C.B. existence

A P.C.B. was detected at the inlet of the output buffer conveyor. Please remove it.

010f38 P.C.B. existence

A P.C.B was detected at the outlet of the input buffer conveyor. Please remove it.

010f39 P.C.B. existence

A P.C.B. was detected at the outlet of the output buffer conveyor. Please remove it.

011001 Empty Feeder (rear)

Please set the feeder (rear) that used by the pattern program.

011002 Empty Feeder (rear)

-----

011101 Empty Feeder (front)

Please set the feeder (front) that used by the pattern program.

011102 Empty Feeder (front)

-----

011201 Transfer main circuit

Press [POWER ON] button to activate Load Power circuit.

011202 Transfer main circuit

Press [POWER ON] button to activate Load Power circuit.

011301 Transfer main circuit (backup, width setup)

Press [POWER ON] button to activate Load Power circuit.

011302 Transfer main circuit (backup, width setup)

Press [POWER ON] button to activate Load Power circuit.

011401 Zeroing

notnish

Perform All zeroing

011501 Feedercommunicationnotnish(rear)

Please wait for a while.

1601 Feedercommunicationnot

nish(front)

Please wait for a while.

011701 P.C.B. position

Please position the P.C.B.

011706 P

.C.B. position

There is no P.C.B. in the setting position.

011801 Datatransfernotnish

It cann't start because data is not set properly.