4OM-1431-006_w.pdf - 第24页

Safety Precautions Safe-13 ALGE-ID Alert Indications described as " " (continuted) Alert Description Related Items If the conveyor top cover is not secured using the magnetic catch after being opened, it may fa…

100%1 / 271
Safety Precautions
Safe-12
ALGE-ID
Alert Indications described as " CAUTION "
Alert Description Related Items
Avoidhandandngerinjuries.
•
Be careful to avoid hand and nger injuries when closing the covers
(door type).
•
Hold the handgrip rmly and open or close the cover (door type)
slowly.
"2.2.3" in
"Chapter 1 (Vol. 1)"
When the green lamp of the light tower is ON or ickering (ON and
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
"2.3.2" in
"Chapter 1 (Vol. 1)"
Before
performinganywork,conrmthatthe"LOCK"
lampon
the operation panel is "ON" (green).
•
Ifthe"LOCK"lampisnotturned
on,themachinecan
be operated at any time from both front and rear sides,
endangering the operators around the machine.
•
Before performing any setup work, etc., with the machine
powered, be sure to press the [PNL CHANGE] button on either
thefrontortherearope
rationpanelandconrmthatthe[LOCK]
lamp is turned "ON".
"2.3.4" in
"Chapter 1 (Vol. 1)"
Before operating the machine, conrm that there are no people around
the machine (GXH-3J) (especially, the other side of the machine
operation) and no objects such as tools and parts are left around the
machine.
"2.4.2" and
"2.4.2.1" in
"Chapter 1 (Vol. 1)"
When a PCB is trapped in the PCB receiving area between the
main machine and the input or the output machine, be sure to
stop the machine before removing the PCB.
Depending on how the output systems are specied for the input and
output machines, the related conveyor may start running in the Y
direction for PCB Y-position arrangement at the moment when the
trapped PCB is removed, causing your nger(s) to get caught in the
conveyor.
"2.4.2" in
"Chapter 1 (Vol. 1)"
0709-001
CAUTION
Safety Precautions
Safe-13
ALGE-ID
Alert Indications described as " " (continuted)
Alert Description Related Items
If the conveyor top cover is not secured using the magnetic
catch after being opened, it may fall down, causing your hand or
ngerstogetcaught,resultingininjury.
Moreover, there is a possibility that the conveyer top cover and the
cover open/closed detection sensor will be damaged.
"2.4.2.2" in
"
Chapter 1 (Vol. 1)"
"1.2.2" in
"Chapter 2 (Vol. 1)"
"3.6" in
"Chapter 3 (Vol. 1)"
When a foreign substance adheres to the magnetic catch, remove it.
Otherwise, the conveyor top cover may not be secured rmly.
"2.4.2.2" in
"Chapter 1 (Vol. 1)"
"1.2.2" in
"Chapter 2 (Vol. 1)"
"3.6" in
"Chapter 3 (Vol. 1)"
Do not bring any magnetizable objects (magnetic card, watch,
etc.) close to the magnetic catch.
Otherwise, the data contained on
the magnetic card may be cleared or the watch may break down.
"2.4.2.2" in
"Chapter 1 (Vol. 1)"
"1.2.2" in
"Chapter 2 (Vol. 1)"
"3.6" in
"Chapter 3 (Vol. 1)"
While closing the conveyor top cover, pay attention to your hand
andngers.
Otherwise, your hand or ngers may get caught in the
cover, resulting in injury.
Firmly hold the grip and slowly close the cover.
"2.4.2.2" and
"2.4.2.3" in
"Chapter 1
(Vol. 1)"
"1.2.2" in
"Chapter 2 (Vol. 1)"
Strong Magnetism
•
Do not bring any metal of high magnetizability close to this.
Otherwise, such metal will easily be magnetized and attracted,
causing an injury to the operator or breakdown of the machine.
•
Do not bring any object such as a magnetic card and a watch
close to the machine.
The data of the magnetic card might be cleared or a watch, etc., may
be damaged due to the strong magnetism.
"2.4.4" in
"Chapter 1 (Vol. 1)"
0709-001
CAUTION
Safety Precautions
Safe-14
ALGE-ID
Alert Indications described as " " (continuted)
Alert Description Related Items
When a tape feeder is attached or detached, be sure not to
drop it.
Otherwise, a foot injury will result or the feeder itself may be
damaged.
Carefully handle each feeder one by one and do not drop any.
"2.4.8" in
"Chapter 1 (Vol. 1)"
"2.1" in
"Chapter 2 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
Hazardoustoyourhandsandngers!
Be sure to hold the handle to move the bank feeder change cart.
"2.4.8" in
"Chap
ter 1 (Vol. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
W
atchyourstep!
·
Be careful not to hit your foot against the cart while moving the bank
feeder change cart.
Especially, the resistance against cart movement may change rapidly
when the oor is ragged and the cart gets caught on the oor or
a sheet is used and the cart gets caught at the edge or a slackened
portion of the sheet.
"2.4.8" in
"Chapter
1 (Vo
l. 1)"
"2.4" in
"Chapter 3 (Vol. 1)"
Do not put your hand in the moving area while the feeder base is
moving up or down.
While the LED of a [FEEDER READY] switch is being ickering, it
indicates that the corresponding feeder base is moving up and down.
"2.4.8" in
"Chapter 1 (Vol. 1)"
Be sure to wear gloves during cleaning. Otherwise, you may cut your
hands on the edges of the lighting hood.
"2.4.9" in
"Chapter 1 (Vol. 1)"
"3.3.3" in
"Chapter 1 (Vol. 4)"
Before starting the automatic operation, check carefully that there is no
person around the machine (especially on the other side of the machine
operation). Make sure that no objects (tools, parts, etc.) are left behind.
"1.1.3" in
"Chapter 2 (Vol. 1)"
The padlock key should be kept in such a way that nobody except the
personnel in charge of maintenance can supervise it.
"1.4.3" in
"Chapter 2 (Vol. 1)"
CAUTION
0802-002