4OM-1431-006_w.pdf - 第40页

Safety Precautions Safe-29 ALGE-ID No. Alert Labels and Description (14) Description l The grounding line (PE) must be connected rst to the leading-in section of the primary power supply . Imperfect grounding will cause…

100%1 / 271
Safety Precautions
Safe-28
ALGE-ID
No. Alert Labels and Description
(11)
Description
l
Do not drop a feeder. Otherwise, a foot injury will result or the feeder i
tself may be
damaged.
Carefully handle each feeder one by one and do not dro
p any
.
(12)
Description
l
The machine should be operated with the covers being attached. Otherwise, part of
your body may be trapped in the moving mechanisms, causing an injury.
(13)
Description
l
Before maintenance work, shut off the power breaker and lock it with the padlock.
l
Even when the power breaker is set to "OFF", the primary line is powered, making
it possible to cause an electric shock.
Be sure to completely stop the power supply to the mac
hine before maintenance
work.
0805-002
Safety Precautions
Safe-29
ALGE-ID
No. Alert Labels and Description
(14)
Description
l
The grounding line (PE) must be connected rst to the leading-in section of the
primary power supply.
Imperfect grounding will cause an electric shock.
(15)
(15-1)
(15-2)
(15-3)
Description
l
This label indicates that high voltage is applied to the area.
Residual voltages may remain behind for a few minutes
in the internal devices of
the machine after power interception.
Before performing maintenance work, wait until the char
ge lamps of the DC power
supply and the servoamplier go "OFF" in 10 minutes or more after the power
breaker is set to "OFF".
0805-002
Safety Precautions
Safe-30
ALGE-ID
No. Alert Labels and Description
(16-1)
CAUTION
Burn Hazard by Lamp
Before lamp replacement, be sure to turn
off the power and wait until the lamp
cools down. Otherwise, a burn will result.
Description
l
The inside of the recognition light source unit becomes high in temperature.
Before replacing the lamp with a new one, set the power breaker to "OFF" and
leave the unit intact until it cools down sufciently.
(16-2)
Description
l
Do not open the cover of the light source device while the machine is running.
The cover, when opened, exposes users to the high voltage components and may
result in electrical shocks.
(17)
CAUTION
PCB Transfer Conveyor Section
Pay attention to the chute.
Do not put your hand in inside the machine during
operation.
The chute might be moved and an injury be resulted.
Description
l
Do not put your hand inside the machine while the machine is running. Otherwise,
your hand may be trapped in the moving mechanisms, causing injury.
0805-003