4OM-1431-006_w.pdf - 第146页

2-15 0802-002 3.2 List of Machine Information Machine Information Codes Display Field A (Scope of Machine Information) Display Field B (Details of Machine Information) 800901 Alarm For Shortage of Comp. The tape end was …

100%1 / 271
2-140709-001
3.2 List of Machine Information
Machine
Information Codes
Display Field A (Scope of Machine Information)
Display Field B (Details of Machine Information)
800701 Alternated Block
Comp. Missing(sensor)
800702 Alternated Block
Comp. Vertical(sensor)
800703 Alternated Block
Comp. Missing(recog.)
800704 Alternated Block
Comp. Recog. Error
800705 Alternated Block
Shortage of component
800706 Alternated Block
Start recovery mode.
800708 Alternated Block
Comp. Thickness(sensor)
800708 Alternated Block
Comp. Pickup Diff.(recog.)
800709 Alternated Block
Comp. Reverse(recog.)
800801 Start Auto Recovery Mode
Comp. Missing(sensor)
800802 Start Auto Recovery Mode
Comp. Vertical(sensor)
800803 Start Auto Recovery Mode
Comp. Missing(recog.)
800804 Start Auto Recovery Mode
Comp. Recog. Error
800805 Start Auto Recovery Mode
Shortage of component
800806 Start Auto Recovery Mode
Comp. Thickness(sensor)
800807 Start Auto Recovery Mode
Comp. Thickness(sensor)
800808 Start Auto Recovery Mode
Comp. Pickup Diff.(recog.)
800809 Start Auto Recovery Mode
Comp. Reverse(recog.)
80080b Start Auto Recovery Mode
Feeder Reload Stop (Splicing)
2-150802-002
3.2 List of Machine Information
Machine
Information Codes
Display Field A (Scope of Machine Information)
Display Field B (Details of Machine Information)
800901 Alarm For Shortage of Comp.
The tape end was detected.
800902 Alarm For Shortage of Comp.
Few components to feed.
800903 Alarm For Shortage of Comp.
A splicing tape was detected. (Alarm E3)
Resupply the component.
800A01 Product Information
Finished product interval :
800A02 Product Information
Auto run interval :
800A03 Product Information
Nozzle usage interval :
800A04 Product Information
Product started by RUN MODE "PASS"Operation.
800B01 Machine Interface Signal
No signal from furnace.
800C01 Cancel Recovery on
-----
800D01 Maintenance Warning
T
rashboxllupwarning.(noticecountover)
800D02 Maintenance W
arning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/Weekly)
800D03 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/1-Monthly)
800D04 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/3-Monthly)
800D05 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/6-Monthlyy)
800D06 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/Designate #1)
800D07 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Oil-Checkup/Designate #2)
800D08 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Upkeep-Checkup/Nozzle)
800D09 Maintenance Warning
Keep the machine condition.(maintenance cycle time : Upkeep-Checkup/Filter #1)
800D0A Maintenance Warning
Keep the machine condition.(maintenance cycle time : Upkeep-Checkup/Filter #2)
800D0B Maintenance Warning
Keep the machine condition.(maintenance cycle time : Designate-Checkup/Item
#1)
800D0C Maintenance Warning
Keep the machine condition.(maintenance cycle time : Designate-Checkup/Item
#2)
2-160802-002
3.2 List of Machine Information
Machine
Information Codes
Display Field A (Scope of Machine Information)
Display Field B (Details of Machine Information)
800D0D Maintenance Warning
Keep the machine condition.(maintenance cycle time : Designate-Checkup/Item
#3)
800D0E Maintenance Warning
Componentboxllupwarning.(noticecountover)
800D0F Maintenance Warning
I
twasthetimeofmaintenance.[Aux
unit]Pleaseperformcleaningofauxspin
drum.
800E01 Program Change Warning
Check the setup of machine.(program change completed)
800E02 Program Change Warning
Check the setup of machine.(Program change completed. Run Mode changed to
"PASS".)
801001 Auto Offset Teach Information
Tape pocket recog error(run continue)
801101 Nozzlediameterconrmation
The disagreement of the nozzle diameter was detected with the linear measure.
Thereisapossibilityofthe
linearmeasuredirtandthenozzledirt,pleaseconrm
whether a different nozzle has adhered.
801201 Stat Auto Head Recovery
Cpu Communication error occurred.(CPU2-CPU3)
801202 Stat Auto Head Recovery
Head cam origin return action not complete.(Not CAM ORIGIN position)
801203 Stat Auto Head Recovery
Head Driver communication is time out.(from cpu3 job)
801204 Stat Auto Head Recovery
Nozzle change action not complete.(cam lock action NG)
801205 Stat Auto Head Recovery
Head cam position return action not complete.
801206 Stat Auto Head Recovery
Nozzle change action not complete.(cam free action NG)
801207 Stat Auto Head Recovery
Nozzle change action not complete.(Not CAM ORIGIN position)
801208 Stat Auto Head Recovery
Unselected Nozzle Drop.
801209 Stat Auto Head Recovery
Component output error(Pickup error) is detected by nozzle level was position.
;Nozzle posture detection
80120a Stat Auto Head Recovery
The selected nozzle was not at position. ;Nozzle posture detection
80120b Stat Auto Head Recovery
Component output error(Others) is detected by nozzle level was position. ;Nozzle
posture detection