4OM-1431-006_w.pdf - 第195页

3-38 0802-002 3.7 Automatic Setup Erroe ID Error Name, Description, Cause, and Remedy 496208 Conveyor Width Automatic Setup (Input conveyor W2) OT (-) was detected during auto operation. Perform zeroing operation. 496301…

100%1 / 271
3-37
3.7 Automatic Setup
0802-002
Erroe ID Error Name, Description, Cause, and Remedy
496101 Conveyor Width Automatic Setup
The initialization is imperfect.
(1) Power on the machine again. (2) The transfer driver has a problem.
496102 Conveyor Width Automatic Setup
It failed in zeroing operation.
Perform zeroing operation.
496103 Conveyor Width Automatic Setup
An alarm for the interference is occurring.
-----
496104 Conveyor Width Automatic Setup
DI was detected.
-----
496105 Conveyor Width Automatic Setup
The conveyor cover opened.
Close the conveyor cover.
496106 Conveyor Width Automatic Setup
Voltage reduction on the power source was detected.
Check the transfer driver.
496107 Conveyor Width Automatic Setup
OT (+) was detected during auto operation.
Perform zeroing operation.
496108 Conveyor Width Automatic Setup
OT (-) was detected during auto operation.
Perform zeroing operation.
496201 Conveyor Width Automatic Setup (Input conveyor W2)
The initialization is imperfect.
(1) Power on the machine again. (2) The transfer driver has a problem.
496202 Conveyor Width Automatic Setup (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496203 Conveyor Width Automatic Setup (Input conveyor W2)
An alarm for the interference is occurring.
-----
496204 Conveyor Width Automatic Setup (Input conveyor W2)
DI was detected.
-----
496205 Conveyor Width Automatic Setup (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
496206 Conveyor Width Automatic Setup (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
496207 Conveyor Width Automatic Setup (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
3-380802-002
3.7 Automatic Setup
Erroe ID Error Name, Description, Cause, and Remedy
496208 Conveyor Width Automatic Setup (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496301 Conveyor Width Automatic Setup (Input conveyor W2)
The initialization is imperfect.
(1) Power on the machine again. (2) The transfer driver has a problem.
496302 Conveyor Width Automatic Setup (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496303 Conveyor Width Automatic Setup (Input conveyor W2)
An alarm for the interference is occurring.
-----
496304 Conveyor Width Automatic Setup (Input conveyor W2)
DI was detected.
-----
496305 Conveyor Width Automatic Setup (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
496306 Conveyor Width Automatic Setup (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
496307 Conveyor Width Automatic Setup (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496308 Conveyor Width Automatic Setup (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496401 Conveyor Width Automatic Setup (Input conveyor W2)
The initialization is imperfect.
(1) Power on the machine again. (2) The transfer driver has a problem.
496402 Conveyor Width Automatic Setup (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496403 Conveyor Width Automatic Setup (Input conveyor W2)
An alarm for the interference is occurring.
-----
496404 Conveyor Width Automatic Setup (Input conveyor W2)
DI was detected.
-----
496405 Conveyor Width Automatic Setup (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
496406 Conveyor Width Automatic Setup (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
3-39
3.7 Automatic Setup
0802-002
Erroe ID Error Name, Description, Cause, and Remedy
496407 Conveyor Width Automatic Setup (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496408 Conveyor Width Automatic Setup (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496501 Conveyor Width Automatic Setup (Input conveyor W2)
The initialization is imperfect.
(1) Power on the machine again. (2) The transfer driver has a problem.
496502 Conveyor Width Automatic Setup (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496503 Conveyor Width Automatic Setup (Input conveyor W2)
An alarm for the interference is occurring.
-----
496504 Conveyor Width Automatic Setup (Input conveyor W2)
DI was detected.
-----
496505 Conveyor Width Automatic Setup (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
496506 Conveyor Width Automatic Setup (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
496507 Conveyor Width Automatic Setup (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496508 Conveyor Width Automatic Setup (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496601 Conveyor Width Automatic Setup (Input conveyor W2)
The initialization is imperfect.
(1) Power on the machine again. (2) The transfer driver has a problem.
496602 Conveyor Width Automatic Setup (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496603 Conveyor Width Automatic Setup (Input conveyor W2)
An alarm for the interference is occurring.
-----
496604 Conveyor Width Automatic Setup (Input conveyor W2)
DI was detected.
-----
496605 Conveyor Width Automatic Setup (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.